topic Guest Wireless Web Authenticaion using SSL (WLC) in Wireless

Guest Wireless Web Authenticaion using SSL (WLC)

LucaSalvatore_2 — Sun, 04 Jul 2021 01:53:40 GMT

Hi,

We have a Cisco WLC (version 4.2.61.0) which we use for our corporate and guest wireless.

For guests, after they associate and open a web browser they are directed to a login page asking them for their user credentials. Currently this login page is a customized page on the WLC it self and only uses HTTP.

Is it possible to have the WLC using HTTPS for this page?

Or do i need to redirect the login page to an external server?

thanks,

Re: Guest Wireless Web Authenticaion using SSL (WLC)

dancampb — Thu, 17 Jun 2010 13:14:18 GMT

If you have HTTPS enabled on the controller the webauth login page should use SSL. Just go under Management - HTTP and make sure you have HTTPS enabled. If you don't have it enable the webauth page would not be encrypted.

Re: Guest Wireless Web Authenticaion using SSL (WLC)

LucaSalvatore_2 — Thu, 17 Jun 2010 21:42:08 GMT

Yes that worked! thanks!

Is it possible to install a valid certificate so the certificate error page is not displayed when someone uses the webauth?

How is this done if it is possible?

Re: Guest Wireless Web Authenticaion using SSL (WLC)

jhedstr2 — Fri, 18 Jun 2010 07:49:14 GMT

That no problem. Just follow the guide in one of these documents:

Chained certificate (think you need to upgrade your system to use chained certifcate) :

http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080a77592.shtml

Unchained certificate:

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00806e367a.shtml

Hope it helps.

Kind regards

Johan