topic Re: Passing DHCP through a AP1232 in Wireless

Passing DHCP through a AP1232

jlinkowsky — Sat, 03 Jul 2021 22:58:30 GMT

I have an AP1232 that allows clients to associate - no issue, but the clients cannot do not receive an IP address from my MS DHCP server. There are plenty of IP's available in the scope, and 'wired' clients receive IP addresses with no problem.

Re: Passing DHCP through a AP1232

scottmac — Tue, 03 Jun 2008 18:47:07 GMT

Are the wireless clients on the same subnet (and in the same DHCP scope) as the wired clients?

Do you have any other subnets / SSIDs on the AP?

Let us know

Scott

Re: Passing DHCP through a AP1232

jlinkowsky — Tue, 03 Jun 2008 19:02:48 GMT

The AP and DHCP scope are on the same subnet as the wired. No VLAN's - flat network.

***This issue was solved by TAC: switch port that the AP was connected too had port security enabled. Needed to be disabled.

Re: Passing DHCP through a AP1232

scottmac — Wed, 04 Jun 2008 01:01:02 GMT

Thanks for posting the solution!

Please throw a Red Check on it so people can identify it as a solution.

Good Luck

Scott