topic Re: AIR-ANT2506 problem in Wireless https://community.cisco.com/t5/wireless/air-ant2506-problem/m-p/928701#M92401 <HTML><HEAD></HEAD><BODY><P>inverted </P></BODY></HTML> Wed, 12 Mar 2008 02:47:53 GMT tpacjer 2008-03-12T02:47:53Z AIR-ANT2506 problem https://community.cisco.com/t5/wireless/air-ant2506-problem/m-p/928699#M92399 <P>i have AIR-ANT2506 installed on ap's for outside and it seems as though i am loosing signal strentgh on them when i investigate the ant is filling up with water due to the lip that is on them. is there a model better suited for my needs.</P> Sat, 03 Jul 2021 22:31:35 GMT https://community.cisco.com/t5/wireless/air-ant2506-problem/m-p/928699#M92399 tpacjer 2021-07-03T22:31:35Z Re: AIR-ANT2506 problem https://community.cisco.com/t5/wireless/air-ant2506-problem/m-p/928700#M92400 <HTML><HEAD></HEAD><BODY><P>jeremy</P><P></P><P>a quick question were the antennas mounted with the cable at the bottom ( the antenna mounted vertically) or out the top (antenna mounted Inverted)</P><P></P><P>Bill</P></BODY></HTML> Tue, 11 Mar 2008 23:08:32 GMT https://community.cisco.com/t5/wireless/air-ant2506-problem/m-p/928700#M92400 bcolvin 2008-03-11T23:08:32Z Re: AIR-ANT2506 problem https://community.cisco.com/t5/wireless/air-ant2506-problem/m-p/928701#M92401 <HTML><HEAD></HEAD><BODY><P>inverted </P></BODY></HTML> Wed, 12 Mar 2008 02:47:53 GMT https://community.cisco.com/t5/wireless/air-ant2506-problem/m-p/928701#M92401 tpacjer 2008-03-12T02:47:53Z Re: AIR-ANT2506 problem https://community.cisco.com/t5/wireless/air-ant2506-problem/m-p/928702#M92402 <HTML><HEAD></HEAD><BODY><P>that is probably why they collected water, antennas are designed to be installed with the cable exiting the bottom. there is no drain hole when they are mounted inverted.</P><P></P><P>when used indoors you would mount them inverted but outdoors right side up.</P><P></P><P>Bill</P><P></P></BODY></HTML> Wed, 12 Mar 2008 05:12:11 GMT https://community.cisco.com/t5/wireless/air-ant2506-problem/m-p/928702#M92402 bcolvin 2008-03-12T05:12:11Z Re: AIR-ANT2506 problem https://community.cisco.com/t5/wireless/air-ant2506-problem/m-p/928703#M92403 <HTML><HEAD></HEAD><BODY><P>is there a similar model antenna that is water sealed or do i need to have sealant put around the cable.</P></BODY></HTML> Wed, 12 Mar 2008 13:07:54 GMT https://community.cisco.com/t5/wireless/air-ant2506-problem/m-p/928703#M92403 tpacjer 2008-03-12T13:07:54Z Re: AIR-ANT2506 problem https://community.cisco.com/t5/wireless/air-ant2506-problem/m-p/928704#M92404 <HTML><HEAD></HEAD><BODY><P>as far as i know all outdoor antennas have a weep hole to allow condensation to drain.</P><P></P><P>Bill</P></BODY></HTML> Thu, 27 Mar 2008 03:29:17 GMT https://community.cisco.com/t5/wireless/air-ant2506-problem/m-p/928704#M92404 bcolvin 2008-03-27T03:29:17Z