topic Re: WiFi remote office connection in Wireless

WiFi remote office connection

Riccardo Veraldi — Sun, 04 Jul 2021 04:59:23 GMT

Hello,

I need to connect 2 remote offices about 50 yards disance.

I would like to ask if there is cisco AP solution so that I could bridge a group of VLAN trunks

on a WiFi conection, I would like to bring a certain number of VLAN trunks to the remote office

using WiFi Connection.

Is it possible in some way ?

thank you

Rick

Stephen Rodriguez — Thu, 12 Apr 2012 14:22:32 GMT

Yes this is possible. For that short of a distance you could use the 1262 running IOS to get this done.

Steve

Sent from Cisco Technical Support iPhone App

johncaston_2 — Thu, 12 Apr 2012 20:30:53 GMT

As Stephen mentioned, yes you can.

Get a couple of autonomous IOS 1262 AP's with external antenna

Set one up as the root bridge (the one connected to the main LAN) and set up the remote end as a bridge.

The connectivity to the LAN is by way of trunk ports so you can send multiple VLAN's across the wireless bridge

Good luck

Sent from Cisco Technical Support iPad App

George Stefanick — Thu, 12 Apr 2012 20:35:29 GMT

Keep in mind, the 1260 TX @ 200mW and Cisco will only offically support up to 6 dBI max on anetnnas. Just an FYI