topic Re: Change 1130AG LAP network settings remotely in Wireless https://community.cisco.com/t5/wireless/change-1130ag-lap-network-settings-remotely/m-p/1102167#M94607 <HTML><HEAD></HEAD><BODY><P>Is the AP on the same LAN segment? If it is it should discover the WLC in its LWAPP discovery process. If not, you will need to prime the AP with the controller address. </P></BODY></HTML> Fri, 17 Oct 2008 16:22:52 GMT dennischolmes 2008-10-17T16:22:52Z Change 1130AG LAP network settings remotely https://community.cisco.com/t5/wireless/change-1130ag-lap-network-settings-remotely/m-p/1102166#M94606 <P>I have a 1130AG LAP that i upgraded to LWAPP. I chose to keep the static IP of the access point. I suspect that during the upgrade process the access point was not set with the IP address of the WLC. </P><P></P><P>Is there any way that I can remotely change the access point's network settings? It has to be done remotely because the access point ins in an inaccessible location</P><P></P><P>Thanks in advance for any help forwarded.</P><P></P><P>Victor</P> Sat, 03 Jul 2021 23:38:47 GMT https://community.cisco.com/t5/wireless/change-1130ag-lap-network-settings-remotely/m-p/1102166#M94606 rhobab 2021-07-03T23:38:47Z Re: Change 1130AG LAP network settings remotely https://community.cisco.com/t5/wireless/change-1130ag-lap-network-settings-remotely/m-p/1102167#M94607 <HTML><HEAD></HEAD><BODY><P>Is the AP on the same LAN segment? If it is it should discover the WLC in its LWAPP discovery process. If not, you will need to prime the AP with the controller address. </P></BODY></HTML> Fri, 17 Oct 2008 16:22:52 GMT https://community.cisco.com/t5/wireless/change-1130ag-lap-network-settings-remotely/m-p/1102167#M94607 dennischolmes 2008-10-17T16:22:52Z