H-Reap vlan mapping groups

pankajprotocolone — Sun, 04 Jul 2021 04:41:47 GMT

Im configuring a WLC 5508 ( version 7 ) with h-reap local switching.

All is working , yet i wonder if the vlan mapping can be done better.

Currently i need to go into each Lightweight Access point , enable h-reap, then set the native vlan , with the final step to map the vlan. This needs to be done for each AP. In an environment of 100's of APs i would take foreever. ( i thought one of the main points of the WLC is centralized management )

Am i missing something ? Is there an easier way to do this ?

Cheers, Pankaj

H-Reap vlan mapping groups

Stephen Rodriguez — Thu, 01 Mar 2012 16:33:44 GMT

you should be able to set the VLAN mappings from WCS/NCS as well.

as well in 7.2 you can now do dynamic vlan assignment, though you still need to list the VLAN the HREAP can access

http://www.cisco.com/en/US/docs/wireless/controller/7.2/configuration/guide/cg_flexconnect.html#wp1247954

Steve

topic H-Reap vlan mapping groups in Wireless

H-Reap vlan mapping groups

H-Reap vlan mapping groups