topic FlexConnect Vlan Mapping in Wireless

FlexConnect Vlan Mapping

awatson20 — Mon, 05 Jul 2021 07:18:27 GMT

5508 WLC on 7.3. For locally switched WLANS, when configuring FlexConnect Vlan Mappings, concerning the native vlan, can this vlan also be used as a vlan mapping for an SSID or not? This would mean that the mgmt IP of the AP's, and this particular SSID would be on the same network.

FlexConnect Vlan Mapping

awatson20 — Fri, 28 Feb 2014 16:44:45 GMT

This is a small branch site with only 2 vlans 1 for data and 1 for voice. Do not want to create another network just for a few AP's.

Re: FlexConnect Vlan Mapping

Scott Fella — Fri, 28 Feb 2014 19:16:25 GMT

Yes... If your ap and users are going to be put in the data Vlan, you can just leave the port to an access port and you don't have to setup any native val. Or Vlan mapping in the FlexConnect AP. If you decide you want to map users to the voice Vlan, then you need to trunk it.

If you want to trunk it anyways, then you can map a WLAN to the data Vlan too.

Sent from Cisco Technical Support iPhone App

FlexConnect Vlan Mapping

awatson20 — Fri, 28 Feb 2014 19:39:57 GMT

Thanks again Scott. That is what we thought just making sure. We wanted the 7925 phones to be on the local voice vlan, so we went ahead and trunked.

FlexConnect Vlan Mapping

Scott Fella — Fri, 28 Feb 2014 20:09:03 GMT

No problem!

Thanks,

Scott

*****Help out other by using the rating system and marking answered questions as "Answered"*****