topic Re: Error upgrading the firmware from 3.0 to ny version on WLC in Wireless

Error upgrading the firmware from 3.0 to ny version on WLC

usmanshariff2008 — Sat, 03 Jul 2021 23:16:34 GMT

Hi All,

Please help me on this issue:-

I am currently running 3.0 version on my WLC 4402 and i want to upgrade it to the latest versions. I am following the correct procedure mentioned in the cisco link but its failing.

The error is TFTP Path is getting as:c:\temp\/ error and the firmware is not getting uploaded,

Plz see the snap shot and let me know what am i doing wrong.

Re: Error upgrading the firmware from 3.0 to ny version on WLC

krishanmistry — Mon, 04 Aug 2008 20:24:10 GMT

change your file path, by deleting c:\temp\/ and just use /.

TFTP Path = /

Hope this helps.

Re: Error upgrading the firmware from 3.0 to ny version on WLC

usmanshariff2008 — Tue, 05 Aug 2008 04:06:26 GMT

Hi Krishan,

TFTP Path=/ :- It takes automatically.

I have tried both ways as mentioned below

Example:-

(Controller) # Transfer download path c:\temp\

and

(Controller) # Transfer download path c:\temp

But the result is same nothing happens. Kinbdly let me know why is this happening.

Thanks in advance.

Re: Error upgrading the firmware from 3.0 to ny version on WLC

krishanmistry — Tue, 05 Aug 2008 08:24:15 GMT

I would not use c:\temp just make sure that you point your tftp server to the folder where the file is:

(Controller) # Transfer download path /

Re: Error upgrading the firmware from 3.0 to ny version on WLC

krishanmistry — Tue, 05 Aug 2008 08:26:25 GMT

also make sure that your tftp server supports files of a 30Meg, tftpd32 is a good tftp server.

Re: Error upgrading the firmware from 3.0 to ny version on WLC

usmanshariff2008 — Tue, 05 Aug 2008 09:55:39 GMT

Thanks Kris,

I will check this and update you with the results.

Re: Error upgrading the firmware from 3.0 to ny version on WLC

usmanshariff2008 — Tue, 19 Aug 2008 07:54:36 GMT

Hi Kris,

Still i am facing the same problem.Now i have downloaded the tftpd32 and I tried connecting via the Service Port interface which has a different IP address. I conneced to the controller via the console cable to issue the commands but it still will not transfer. I can ping the tftp server from the Controller. I used the paths specified , ie , "." and "./" but stil the result is same.

Kindly let me know if there is any thing missing?

Thanks in advance.

Usman