https://community.cisco.com/t5/wireless/802-11ac-with-nac-with-without-psk/m-p/3217280#M977 <P>previously 802.11ac requires WMM and wpa2/aes psk for the client to achieve optimum performance.</P> <P>so what happens when we use NAC/802.1x and leave off the PSK?</P> Mon, 05 Jul 2021 14:52:31 GMT David Ritter 2021-07-05T14:52:31Z https://community.cisco.com/t5/wireless/802-11ac-with-nac-with-without-psk/m-p/3217280#M977 <P>previously 802.11ac requires WMM and wpa2/aes psk for the client to achieve optimum performance.</P> <P>so what happens when we use NAC/802.1x and leave off the PSK?</P> Mon, 05 Jul 2021 14:52:31 GMT https://community.cisco.com/t5/wireless/802-11ac-with-nac-with-without-psk/m-p/3217280#M977 David Ritter 2021-07-05T14:52:31Z https://community.cisco.com/t5/wireless/802-11ac-with-nac-with-without-psk/m-p/3217499#M978 <P>You can still get 802.11ac rates ..</P> <P>&nbsp;</P> <P><STRONG>Must do:</STRONG> <FONT color="#008000">802.1x</FONT> <FONT color="#008000">WPA2</FONT>/<FONT color="#008000">AES</FONT> with WMM required and enabled 80Mhz channels.</P> <P>Also check this posts:&nbsp;<A href="https://mrncciew.com/2014/01/10/802-11ac-with-cisco-3700-ap/" target="_blank">https://mrncciew.com/2014/01/10/802-11ac-with-cisco-3700-ap/</A></P> <P>Regards</P> <P>Dont forget to rate helpful posts</P> <P>&nbsp;</P> <P>&nbsp;</P> Thu, 16 Nov 2017 08:08:18 GMT https://community.cisco.com/t5/wireless/802-11ac-with-nac-with-without-psk/m-p/3217499#M978 Sandeep Choudhary 2017-11-16T08:08:18Z