topic Re: cannot ping WAP 1141 in Wireless

cannot ping WAP 1141

abukuru95 — Sun, 04 Jul 2021 03:03:35 GMT

hello Guys, i have an AP connected to a gigabit interface on my switch. all seems well configured.a show cdp neighbors command on the neighboring switch shows my AP as a neighbor with its IP address settings.A ping to the AP is not successful. trunking between the switch and AP is good with the allowed vlans configured on the switch interface and trunking configured.the allowed vlans on the switch correspond to the vlans on the AP.

what would this be ? before, it was functional but now not working.

any help on this is welcome.

Re: cannot ping WAP 1141

Nicolas Darchis — Fri, 08 Apr 2011 14:43:41 GMT

Maybe you can post your switch and ap configuration ?

cannot ping WAP 1141

abukuru95 — Fri, 08 Apr 2011 14:56:55 GMT

hello Nicolas, here is the config for switch interface and AP. thanks in advance.

Re: cannot ping WAP 1141

dmantill — Fri, 08 Apr 2011 15:01:12 GMT

LOL easy cake...

Even if you spcify the vlan ID as native you need to allow that vlan with the switchport trunk allowed command, add 99 and that should do it.

Re: cannot ping WAP 1141

abukuru95 — Sat, 09 Apr 2011 10:16:10 GMT

thanks for the help Dmantill.

Re: cannot ping WAP 1141

dmantill — Sat, 09 Apr 2011 14:01:26 GMT

And thanks to Nicolas that requested the right information.

cannot ping WAP 1141

abukuru95 — Mon, 11 Apr 2011 06:01:56 GMT

thanks for the help Nicolas.

problem solved due to the published config. you requested.