topic Guest User Password in Wireless

Guest User Password

leonardus aditya — Sun, 04 Jul 2021 05:16:19 GMT

Hai all,

who have experience about Lobby Ambasador on WLC?

after Lobby Ambassador create/generate account for Guest User, can we print out each Guest User Account? so we can give the hardcopy about they wireless account.

all, please advice..

thanks

Guest User Password

stefan.angerer — Fri, 08 Jun 2012 06:35:41 GMT

Hi,

printing of guest accounts is only included in WCS/NCS, not in the WLC itself.

regards

Stefan

Guest User Password

leonardus aditya — Fri, 08 Jun 2012 06:49:05 GMT

Hai Stefan,

thanks for info, so we can't just using WLC for that feature ?

others question are :

- so if we have WCS or NCS, we only create Lobby Ambassador account on WCS/NCS right? we don't need to create lobby ambassador on WLC ?

1	R-PI-1.1-K9	Cisco Prime Infrastructure 1.1	1
2	R-PI-1.1-100-K9	Prime Infrastructure 1.1 Software - 100 Device Base Lic	1
3	L-PILMS42-100	Prime Infrastructure LMS 4.2 - 100 Device Base Lic	1
4	L-PINCS11-100	Prime Infrastructure NCS 1.1 - 100 Device Base Lic	1
5	L-PINCSW11-100	Prime Infrastructure NCS WAN 1.1 - 100 Device Base Lic	1
6	CON-SAU-PI11100	SW APP SUPP + UPGR PI 1.1 Software - 100 Device Base Lic	1

Above is BoQ for Cisco Prime, can do Printing feature with that BoQ?

regards,

leonardus

Guest User Password

stefan.angerer — Fri, 08 Jun 2012 07:12:17 GMT

Hi Leonardus,

you cannot print guest accounts directly from a WLC, so if you have a NCS available I would recommend to do it there.

And right, you only need to setup the lobby ambassador accounts on NCS, not on the WLC as well - NCS will push the guest user credentials via SNMP to the controller(s).

Please also check the configuration guide if NCS fulfills all your requirements:

http://www.cisco.com/en/US/docs/wireless/ncs/1.0/configuration/guide/manag.html#wp1246090

regards

Stefan