topic Restricting MAC Addresses in Wireless

Restricting MAC Addresses

azevon — Sun, 04 Jul 2021 15:42:59 GMT

Greetings all - I'm testing out this new Aironet 1200 (I'm comming from Orinocos) and its ability to allow access only to those MAC addresses which I specify. I've tried to follow the directions, but I seem not to able to do this. I have hundred of addresses in a table that's importable and exportable from my Orninoco WAP's. Can I import this table into the Cisco? Thanks in advance.

Re: Restricting MAC Addresses

derwin — Mon, 19 May 2003 22:50:43 GMT

If you have hundreds of address to manage then your best option is to use a AAA server and do server based mac address authentication.

http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo_350/accsspts/ap350scg/ap350ch8.htm#1029067

This is a better option as you only have one data base for them and all your AP's check against that data base it scales much better than adding them to the AP

Re: Restricting MAC Addresses

rsahney — Wed, 21 May 2003 15:35:59 GMT

apologize clicked wron one...