topic NCS reporting in Wireless https://community.cisco.com/t5/wireless/ncs-reporting/m-p/2309256#M98720 <HTML><HEAD></HEAD><BODY><P>Cannot see all the RX neighbors on the Monitor &gt; AP Radio detail page. </P><P></P><P> <A name="wp206154"></A></P><P> <STRONG>Symptom:</STRONG> Complete list of neighbors is not shown. </P><P></P><P> <A name="wp206155"></A></P><P> <STRONG>Conditions:</STRONG> This occurs when the list is longer. </P><P></P><P> <A name="wp206156"></A></P><P> <STRONG>Workaround:</STRONG> Minimize the charts to see complete list. </P></BODY></HTML> Thu, 05 Sep 2013 05:23:31 GMT Saurav Lodh 2013-09-05T05:23:31Z NCS reporting https://community.cisco.com/t5/wireless/ncs-reporting/m-p/2309254#M98718 <P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Hi All,&nbsp; </P><P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; We have been having issues with our AP's after wide spread power outages. The AP's will associate with the controller but will not with its RX neighbors. We then go ahead and reboot the AP and the neighbors restore. I am wondering if there is a way to report on AP's that do not have any RX Neighbors? </P><P>Thanks </P> Sun, 04 Jul 2021 07:39:38 GMT https://community.cisco.com/t5/wireless/ncs-reporting/m-p/2309254#M98718 dmacdougall 2021-07-04T07:39:38Z NCS reporting https://community.cisco.com/t5/wireless/ncs-reporting/m-p/2309255#M98719 <HTML><HEAD></HEAD><BODY><P>Hi, </P><P></P><P>Following link might be a help,</P><P></P><P><A href="http://www.cisco.com/en/US/docs/wireless/ncs/1.0/configuration/guide/reps.html">http://www.cisco.com/en/US/docs/wireless/ncs/1.0/configuration/guide/reps.html</A></P></BODY></HTML> Wed, 04 Sep 2013 16:16:08 GMT https://community.cisco.com/t5/wireless/ncs-reporting/m-p/2309255#M98719 Anas Naqvi 2013-09-04T16:16:08Z NCS reporting https://community.cisco.com/t5/wireless/ncs-reporting/m-p/2309256#M98720 <HTML><HEAD></HEAD><BODY><P>Cannot see all the RX neighbors on the Monitor &gt; AP Radio detail page. </P><P></P><P> <A name="wp206154"></A></P><P> <STRONG>Symptom:</STRONG> Complete list of neighbors is not shown. </P><P></P><P> <A name="wp206155"></A></P><P> <STRONG>Conditions:</STRONG> This occurs when the list is longer. </P><P></P><P> <A name="wp206156"></A></P><P> <STRONG>Workaround:</STRONG> Minimize the charts to see complete list. </P></BODY></HTML> Thu, 05 Sep 2013 05:23:31 GMT https://community.cisco.com/t5/wireless/ncs-reporting/m-p/2309256#M98720 Saurav Lodh 2013-09-05T05:23:31Z