topic Hi in Wireless

Cisco 1532i RF pattern confusion

Brett Verney — Mon, 05 Jul 2021 10:42:04 GMT

Hi all,

When I look at the RF pattern for the Cisco 1532i AP, it doesn't look right. When using Ekahau Site Survey, I only get the advertised pattern when tilting the AP 90 degrees; essentially having the AP face the ground, not running vertical like the image below. In fact when I have the AP running vertical (flat against a pole for example), the pattern almost has no back lobes and looks exactly like a patch antenna.

I found a presentation that backs this up. See below;

Can somebody shed some light as to which way the AP should be mounted to get the best omni coverage? And are the patterns shown above, the best I will get for a 1532i? An 'AP on a stick' survey is not in scope for a project I am working on so I can't test in the real world.

Would love to hear peoples thoughts, or know if anyone has had experience mounting them each way.

- Brett V

Yes please, I have this

Jeremy ALEXANDRE — Sat, 05 Mar 2016 18:09:45 GMT

Yes please, I have this problem too.

Thanks.

Hey Brett

mario.jost — Wed, 08 Feb 2017 07:44:41 GMT

Hey Brett

We have the same issue/question right now. Are going to deploy lots of 1532i on multiple campuses. What is your experience with this model? And where did you find the radio pattern images? When i google for them, the only images i can find are from your post. They are very limited quality, though.

Thanks for your feedback.

Mario

Hi

dkalinsky — Thu, 16 Feb 2017 15:47:14 GMT

The actual patterns can be found at link below:

http://www.cisco.com/c/en/us/products/collateral/wireless/aironet-antennas-accessories/product_data_sheet09186a008008883b.html

Try to search "Cisco Aironet 1530 Series Integrated Antenna" on this page.

I don't have any experience with the 1530 APs but elevation patterns show that this antennas don't have lobes at 270º. So if you install this AP at 1-2m altitude, it should be looked like a patch antenna. Looks like the AP is designed to radiate with patch pattern.

Have a look at the 1570 antenna pattern. It looks like "true" omni:

Cisco Aironet 1570 Series Integrated Antenna

2.4 GHz, 3 dBi Azimuth Plane Radiation Pattern	5 GHz, 5 dBi Azimuth Plane Radiation Pattern	2.4 GHz, 3 dBi Elevation Plane Radiation Pattern	5 GHz, 5 dBi Elevation Plane Radiation Pattern