topic Vlan Implement in Wireless

Vlan Implement

osman_gadji — Sun, 04 Jul 2021 01:03:04 GMT

Hello guys

I need implement Vlan in network where i have a cisco 350 series WGB, cisco 1300 series Access Point/Bridge and Cisco 1200 series Access Point/Bridge.

My wireless network schema illustrated in a NetWork Description.vsd file(Microsoft Visio File)

All devices configurations and versions files attached.

What can you say about this? When i started reconfigure network, it faced problems.

Please help to understand.

Re: Vlan Implement

osman_gadji — Tue, 15 Sep 2009 22:35:19 GMT

Other attachments files with configurations

Re: Vlan Implement

jeff.kish — Wed, 16 Sep 2009 11:52:25 GMT

Hi Osman,

Were the workgroup bridges all working prior to the VLAN configuration change?

Re: Vlan Implement

osman_gadji — Wed, 16 Sep 2009 18:00:55 GMT

Hello jeff.kish

Yes, working prior change!

Re: Vlan Implement

jeff.kish — Wed, 16 Sep 2009 20:28:24 GMT

Osman,

Try running the following config script:

conf t

int dot0.2

bridge-group 2

int dot0.3

bridge-group 3

int fa0.2

bridge-group 2

int fa0.3

bridge-group 3

Cisco APs use the subinterfaces to represent each VLAN, which you have correctly configured. But to link the radio subinterfaces to the Ethernet subinterfaces, a bridge-group is required on each. You have bridge-group 1 configured on your native VLAN, which is correct.

Try that and hopefully you'll be up and working again.