topic Client stuck on DHCP_REQD in Wireless

Client stuck on DHCP_REQD

PutmanoAIT — Mon, 05 Jul 2021 11:52:25 GMT

Dear Experts,

I have configured Cisco WLC 2504 version 8.1.102 with 6 access points and have 4 SSIDs. All access points are already joined with controller. Only 3 access point are work properly,however 3 access point work not correct. The issue is the client that connect to 3(problem APs) cannot get ip address from DHCP server. All client that connect to 3(problem APs) is stuck on DHCP_REQD. As picture below.

Cheetah-flex: local auth

mohanak — Wed, 06 Apr 2016 04:32:58 GMT

Cheetah-flex: local auth client "Policy Manager State" is DHCP_REQD

CSCux05547

Description

Symptom:
sh client details shows policy manager as DHCP_REQD

Conditions:
wlan is configured to be local auth

Workaround:
none

this is not the correct forum

Javier Contreras — Wed, 06 Apr 2016 06:53:32 GMT

this is not the correct forum to open this question, moving the thread...

Sorry, but this bug has no

Freerk Terpstra — Thu, 07 Apr 2016 20:01:37 GMT

Sorry, but this bug has no relation to this topic. As you can see in the screenshot central authentication is being used and not local which is a prerequisite for this bug.

Did you already verified the switch port configuration connected to the three access-points? Check that the MAC address of the client is actually being learned within VLAN 65. If that is the next step is to verify that the DHCP discover of the client reached the DHCP server.

Please rate useful posts... 🙂