topic Re: How to Set Conference Password for Meetme Bridge in Call Control

How to Set Conference Password for Meetme Bridge

rilenp2006 — Thu, 03 Apr 2014 11:05:47 GMT

hi,

can anyone help me to set conference password to login meetme Bridge using TCL Scripts,

Details:

CCME 4.1

IOS :12.4(15)T1

cisco 3825 ISR Router.

Rgards,

Chaitanya D

Re: How to Set Conference Password for Meetme Bridge

Raghavendra G V — Thu, 03 Apr 2014 12:11:47 GMT

Hi Chaitanya,

how you are trying to set the password? could you please explain more what you are trying to do?

Thanks,

Raghavendra

Re: How to Set Conference Password for Meetme Bridge

rilenp2006 — Fri, 04 Apr 2014 06:35:26 GMT

hi Raghavendra,

i have crated a meet me conference Bridge in my CCME router, i want anyone login to this bridge using PIN number
,

1) dialing conference Bridge number

2) announcment will be played for entring PIN number

3) after enterning PIN only it should connect to conference

4)if PIN is not corrcet it will play announcment to Retry

Re: How to Set Conference Password for Meetme Bridge

rilenp2006 — Fri, 04 Apr 2014 06:41:16 GMT

Hi Ragavendra,

i have created meet me conference Bridge in my CCME Router 3825

senario is like

1) if anyone want to join confrence Bridge dial bridge number

2)play announcment to enter conference PIN

3)if PIN is correct connect to Conference

4)if PIN is wrong Paly announcment to enter correct password

Like wise..

Regards,

Chaitanya

Re: How to Set Conference Password for Meetme Bridge

rilenp2006 — Fri, 04 Apr 2014 06:43:42 GMT

hi raghavendra,

the senario i have mentioned above need to be created using tcl script, for this only i am requesting for help,

because i am not good at that.

Re: How to Set Conference Password for Meetme Bridge

Raghavendra G V — Fri, 04 Apr 2014 07:46:54 GMT

Hi Chaitanya,

Attached TCL script will cover your requirements, you can modify it accordingly.

Thanks,

Raghavendra

Re: How to Set Conference Password for Meetme Bridge

rilenp2006 — Sat, 26 Apr 2014 09:20:41 GMT

hi Raghavendra,

can you tell me the procedure how do i map this script to meetme dn number: 44567, i have uploaded them to flash, but how do i map this script to perticular number in cisco cme, 15.1 IOS cme 8.0

Re: How to Set Conference Password for Meetme Bridge

Raghavendra G V — Mon, 28 Apr 2014 09:01:06 GMT

Hi,

To invoke your TCL script, you need to configure the application and then associate the application to inbound dial peer.

for example :

config t

application

service password2call flash:password2call.tcl

param enter-pw-prompt flash: < any audio file >

param password1 <password>

dial-peer voice 1 voip

service password2call

for more information you can refer TCL IVR Videos and programming guide in below link

https://developer.cisco.com/site/collaboration/call-control/voice-gateway/documentation/

Thanks,

Raghavendra

Re: How to Set Conference Password for Meetme Bridge

rilenp2006 — Wed, 30 Apr 2014 10:16:59 GMT

Hi raghavendra,

i have configured the steps which you have given, but problem is my conference bridge number is 78928,

how do i mapp the script to this perticular number, even now also i dial to 78928 no meesage is playing its dierectly connecting

Re: How to Set Conference Password for Meetme Bridge

Raghavendra G V — Wed, 30 Apr 2014 10:31:45 GMT

did you configured script under the correct dial peer, make sure that audio file is copied to flash.

please collect logs with below debugs if you still face the issue.

debug voip app

Thanks,

Raghavendra

Re: How to Set Conference Password for Meetme Bridge

rilenp2006 — Thu, 01 May 2014 06:27:05 GMT

hi please find the debugs, and also while giving the commads it si showing like enter-pw-prompt flash:enter_pin.au, it is showing namespace is not configured in password2call

Re: How to Set Conference Password for Meetme Bridge

Raghavendra G V — Fri, 02 May 2014 07:27:27 GMT

Hi,

From the logs i don't see TCL script is triggered, please make sure you have configured the script under right incoming dial peer.

Thanks,

Raghavendra

Re: How to Set Conference Password for Meetme Bridge

faridsyusifov — Thu, 25 Jun 2015 05:56:35 GMT

Hello, can you please tell me is this solution working or not?

Re: How to Set Conference Password for Meetme Bridge

Pranjol Saikia — Sat, 22 Aug 2015 13:23:20 GMT

Checkout MARS MeetMe Password in the link below for the below features

http://www.parsec-tech.com/portfolio.html

Application VIDEO : MARS MeetMe Password for Cisco CUCM - YouTube

MARS Meet-Me Password application adds the following capabilities

1. Remotely start the MeetMe conference

2. Authentication/Password for MeetMe Conference

3. Meeting Host Required/Not Required

4. Start the MeetMe Conference from Jabber Client

5. Start the MeetMe Conference from iOS Based Phone , Android Based Phone

THERE IS NO NEED TO UCCE/UCCX/UNITY for this application

Re: How to Set Conference Password for Meetme Bridge

jerrylu — Tue, 23 Aug 2016 09:07:27 GMT

Hi Raghavendra,

I got the same issue. I tried your script and once I inputted the correct password the call was ended and not routed to my MeetMe number.

Is there anything I need to change in your script?

Many thanks,

Jerry

Re: How to Set Conference Password for Meetme Bridge

yawming — Tue, 23 Aug 2016 16:27:23 GMT

This script actually has nothing to do with MEETME, I would check the following:

1. calling meetme directly without tcl script see if it's working.

2, use this script but just set the destination to a phone see if it's working.

If both are working fine then we need to debug the interworking.

Re: How to Set Conference Password for Meetme Bridge

jerrylu — Wed, 24 Aug 2016 01:36:26 GMT

Thanks Yawchen for your quick reply!

1. calling meetme directly without tcl script see if it's working. -- Works

2. use this script but just set the destination to a phone see if it's working. -- Where to set the destination?

The following is the dial-peer I used. I would like the call to 7177 can be rerouted to my MeetMe number after user inputted the correct password. My real MeetMe number is 1111.

dial-peer voice 7177 voip

description MeetMe

service password2call

destination-pattern 7177

session target ipv4:128.224.160.2

incoming called-number 7177

dtmf-relay h245-alphanumeric

codec g711ulaw

no vad

Thanks!

Jerry

Re: How to Set Conference Password for Meetme Bridge

Raghavendra G V — Wed, 24 Aug 2016 03:04:16 GMT

Hi Jerry,

Check your meetme number configured with unlocked as below.

ephone-dn 11 octo-line
number 1111
conference meetme unlocked

Thanks,
Raghavendra

Re: How to Set Conference Password for Meetme Bridge

jerrylu — Wed, 24 Aug 2016 05:00:22 GMT

Hi Raghavendra,

I configured my meetme number just as you posted here.

My question is how can the call to 7177 be routed to my meetme number 1111.

I didn't find any parameter about it in password2call.

Thanks,

Jerry

Re: How to Set Conference Password for Meetme Bridge

jerrylu — Wed, 24 Aug 2016 06:32:46 GMT

I did some test and found if I configure the dialed number in dial peer same with the meetme number the call can be routed to meetme successfully.

Wondering how can add a parameter to route call to the specified meetme number.

So the dialed number can be different with the meetme number.

Many thanks,

Jerry