topic Re: TCL scripting problem in CUBE router in Call Control https://community.cisco.com/t5/call-control/tcl-scripting-problem-in-cube-router/m-p/3567617#M2010 <HTML><HEAD></HEAD><BODY><P>I wonder if you can share the script, the part of handling transfer.</P><P></P><P>Thanks !</P></BODY></HTML> Mon, 03 Aug 2015 16:26:22 GMT yawming 2015-08-03T16:26:22Z TCL scripting problem in CUBE router https://community.cisco.com/t5/call-control/tcl-scripting-problem-in-cube-router/m-p/3567616#M2009 <HTML><HEAD></HEAD><BODY><P>We have two CUBE routers and use TCL IVR to handle some of the inbound SIP call.</P><P>While testing we found that , if the caller disconnects while the message is being played , the transfer is still initiated and target phone rings for few seconds [ 6 rings ] before disconnecting.</P><P></P><P>Is there a way to avoid this overrun? Do we need modify the IVR scripts?</P><P></P><P>Thanks in advance.</P></BODY></HTML> Mon, 03 Aug 2015 13:28:25 GMT https://community.cisco.com/t5/call-control/tcl-scripting-problem-in-cube-router/m-p/3567616#M2009 Linli Zhao 2015-08-03T13:28:25Z Re: TCL scripting problem in CUBE router https://community.cisco.com/t5/call-control/tcl-scripting-problem-in-cube-router/m-p/3567617#M2010 <HTML><HEAD></HEAD><BODY><P>I wonder if you can share the script, the part of handling transfer.</P><P></P><P>Thanks !</P></BODY></HTML> Mon, 03 Aug 2015 16:26:22 GMT https://community.cisco.com/t5/call-control/tcl-scripting-problem-in-cube-router/m-p/3567617#M2010 yawming 2015-08-03T16:26:22Z