topic Re: TAPI for Windows 10 - x64 in Call Control

TAPI for Windows 10 - x64

juergen.fritz.albwerk — Tue, 17 Nov 2015 07:08:45 GMT

Did somebody know if there will be a TAPI-Driver for Windows 10 - x64?

I couldn't find any information (see https://developer.cisco.com/site/tapi/wiki/supported-windows-os/)

It takes a very long time (about 9 months!) after the release of Windows 8 to get a TAPI-Driver - so how long will it take that Cisco do something for Windows 10?

Thanks for any hints 🙂

Re: TAPI for Windows 10 - x64

mpotluri — Thu, 19 Nov 2015 01:43:26 GMT

Windows 10 will be supported in the next release of CUCM. Next version of CUCM will be out in the middle part of next year.

Re: TAPI for Windows 10 - x64

Christian Isaksen — Mon, 01 Feb 2016 08:08:19 GMT

Hi Mohan
I've got some customers running CUCM 10.6 in our HCS environment and they are upgrading to Windows 10 before Microsoft begins to charge a fee for upgrading.

Are there any workaround having these customers running Cisco TAPI on windows 10 - 64 bit

Thanks in advance

Christian

Re: TAPI for Windows 10 - x64

mpotluri — Mon, 01 Feb 2016 15:14:57 GMT

I think Installer needed some changes to make it work in windows 10 but you can try the Cisco TSP installer you have on windows 10 and escalate the issue to Cisco through your channels if it doesn't work. I will try to find if there are any viable work arounds.

Re: TAPI for Windows 10 - x64

Christian Isaksen — Wed, 03 Feb 2016 06:26:56 GMT

Hi Mohan

Thanks a lot I'll talk with the customers. I believe that they have tried installing it. But I'll catch up with them.

Re: TAPI for Windows 10 - x64

mpotluri — Wed, 03 Feb 2016 06:36:53 GMT

Looks like there is no easy work around for fresh windows 10 machines. If windows version is getting upgraded to Windows 10, the existing TSP should be available after upgrade and continue to work after upgrade. Unless there is requirement to upgrade TSP, users should be ok.

Fresh windows 10 machines do not any workaround. There is discussion to back port the changes. I will update this thread if there is a back port.

Re: TAPI for Windows 10 - x64

pmctiernan — Thu, 05 May 2016 14:33:43 GMT

Hi is the new TSP available now? Is there a date for this yet? Will we be able to get the TSP and deploy it to earlier versions?

Thanks,

Re: TAPI for Windows 10 - x64

dustin_armstrong — Wed, 11 May 2016 21:14:39 GMT

I am waiting for a new version as well. Just tried using CUCM 10.5.2 on Windows 10 and no luck. IP address at times does not stick and lines do not show in dialer. Any updates or work arounds appreciated.

Re: TAPI for Windows 10 - x64

angus_lyons — Tue, 17 May 2016 11:43:27 GMT

I too am hoping that TAPI support windows 10 will be back-ported. As we are currently upgrading customers to 10.5 and many of them are going for Windows 10 in a big way.

It is just not viable to postpone these upgrade until 11.5 is out, and tested.

Re: TAPI for Windows 10 - x64

mpotluri — Fri, 03 Jun 2016 23:00:08 GMT

search for at "Windows 10 support for TAPI" https://bst.cloudapps.cisco.com.

You should get the cdet tracking this issue and list of releases that has the fix.

Re: TAPI for Windows 10 - x64

fleclair — Wed, 14 Sep 2016 18:01:22 GMT

Hi Mohan,

I see Windows 10 supported from CUCM 11.5. Does that mean I can use this CUCM TAPI plug-in on a Windows 10 64 bits with CUCM 9.1 ?

Is this supported ?

Many thanks...Francois

Re: TAPI for Windows 10 - x64

mkhodosh — Wed, 14 Sep 2016 19:17:49 GMT

Hi Francois,

It is not clear what CUCM release and TAPI plug-in release combination you are asking about.

In any case for 9.x Windows 10 support was added in 9.1.2. CDET - CSCuw55248

Regards,

-Mikhail-

Re: TAPI for Windows 10 - x64

fleclair — Wed, 14 Sep 2016 20:08:01 GMT

Thanks Mikhail,

I see that Windows 10 is supported on 9.1(2)SU5 but my customer is still at the first release of 9.1(2).

What else can we do if the customer stays at 9.1.2.10000-28 ?

Can he use the TAPI plugin from CUCM 91(2)SU5 or CUCM 11.5 that supports Windows 10 and run it on Windows 10 workstations that talk to CUCM 9.1(2) ?

Thanks again,

Francois

Re: TAPI for Windows 10 - x64

mkhodosh — Wed, 14 Sep 2016 20:56:57 GMT

Hi Francois,

Please see inline.

Regards,

-Mikhail-