https://community.cisco.com/t5/call-control/cucm-12-jtapi-call/m-p/3796683#M2657 <P>Thanks for your response! So I have to use the correct method! Thanks!</P> Thu, 07 Feb 2019 10:49:04 GMT kostas0011 2019-02-07T10:49:04Z https://community.cisco.com/t5/call-control/cucm-12-jtapi-call/m-p/3795095#M2655 <P>Hello, I new in the JTAPI area and I would like to ask it is possible to makecall to third party sip Directory Name ?</P><P>Thanks</P> Tue, 05 Feb 2019 14:31:10 GMT https://community.cisco.com/t5/call-control/cucm-12-jtapi-call/m-p/3795095#M2655 kostas0011 2019-02-05T14:31:10Z https://community.cisco.com/t5/call-control/cucm-12-jtapi-call/m-p/3796181#M2656 <P>If your CUCM system is fully configured for SIP URI dialing to the 3rd party endpoint, then JTAPI will accept the SIP URI in dial/connect methods: <A href="https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/jtapi_dev/11_5_1/CUCM_BK_C04D9E75_00_jtapi-developers-guide_1151/CUCM_BK_C04D9E75_00_jtapi-developers-guide_1151_chapter_011.html#CUCM_TP_U4926DCA_00" target="_blank">https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/jtapi_dev/11_5_1/CUCM_BK_C04D9E75_00_jtapi-developers-guide_1151/CUCM_BK_C04D9E75_00_jtapi-developers-guide_1151_chapter_011.html#CUCM_TP_U4926DCA_00</A></P> <P>I.e. if the device you are controlling can dial and connect to the URI, then JTAPI can control the phone to dial the URI.</P> Wed, 06 Feb 2019 18:45:44 GMT https://community.cisco.com/t5/call-control/cucm-12-jtapi-call/m-p/3796181#M2656 dstaudt 2019-02-06T18:45:44Z https://community.cisco.com/t5/call-control/cucm-12-jtapi-call/m-p/3796683#M2657 <P>Thanks for your response! So I have to use the correct method! Thanks!</P> Thu, 07 Feb 2019 10:49:04 GMT https://community.cisco.com/t5/call-control/cucm-12-jtapi-call/m-p/3796683#M2657 kostas0011 2019-02-07T10:49:04Z