topic Re: About recording software based on BIB mode in Call Control

About recording software based on BIB mode

webcti629822 — Fri, 19 Sep 2014 11:25:34 GMT

I want to develop a suite of recording software based on BIB mode,but I have some questions as followed:

1.Is it wether need CTI connection eastablished by TAPI between CUCM and recording server ?

2. Which message need be sended to CUCM by recording server after CUCM sended Invite message to recording server?

3. How do recording server get the end status when the current session finished?will CUCM send message to recording server to notify the session finished?

4. Is it only RTP stream between the agent phone and recording server?not include signaling message?

Thanks!

Wii Lew

Re: About recording software based on BIB mode

Geevarghese Cheria — Fri, 26 Sep 2014 10:30:00 GMT

Hi Wii,

1.Is it wether need CTI connection eastablished by TAPI between CUCM and recording server ?

Ans) Its only for Monitoring - Computer Telephony Integration (CTI) provides the ability for applications to monitor calls on a per-call basis. Cisco defines the monitor target as the party that is monitored and the monitor initiator as the monitoring party.

The Cisco Zephyr recorder provides a basic and powerful recording capability and does not rely on CTI to obtain the far-end information.

2. Which message need be sended to CUCM by recording server after CUCM sended Invite message to recording server?

Ans) Cisco Unified Communications Manager sends both the agent (near-end) and customer (far-end) call information to the recorder via SIP messages. Messages travel through the SIP trunk. (Prior to this enhancement, only the near-end information was sent via SIP messages; retrieval of the far-end information required a CTI connection to Cisco Unified Communications Manager.

3. How do recording server get the end status when the current session finished?will CUCM send message to recording server to notify the session finished?

4. Is it only RTP stream between the agent phone and recording server?not include signaling message?

Eventhough its related to cucm6.x the data in the document is relevant to recording.

Request to refer Silent Monitoring and Recording Using Cisco Unified Communications Manager - Cisco for the answer to the above two questions.

Thanks and Regards,

Geevarghese

Re: About recording software based on BIB mode

webcti629822 — Sat, 27 Sep 2014 02:30:56 GMT

Hi, Geevarghese

So great!thank you very very….much!!!

Best regards

Wii Lew

发件人: gcheria

发送时间: 2014年9月26日 18:30

收件人: Wii Lew

主题: Re: - About recording software based on BIB mode

<https://communities.cisco.com/> Cisco Communities

About recording software based on BIB mode

reply from gcheria <https://communities.cisco.com/people/gcheria> in Developer > Collaboration > Call Control > UC Manager SIP - View the full discussion <https://communities.cisco.com/message/165031#165031>