topic Re: lineMakeCall Failing in Call Control https://community.cisco.com/t5/call-control/linemakecall-failing/m-p/3477579#M794 <HTML><HEAD></HEAD><BODY><P>I didn't have the dial plan settings correct for my CTI port extension. Once I configured those I was able to get this working.</P></BODY></HTML> Wed, 28 May 2014 13:00:36 GMT bhoover02 2014-05-28T13:00:36Z lineMakeCall Failing https://community.cisco.com/t5/call-control/linemakecall-failing/m-p/3477578#M793 <HTML><HEAD></HEAD><BODY><P>My application attempts to call an extension from a CTI port. The call to lineMakeCall() is successful but I immediately get back a disconnect event with reason LINEDISCONNECTMODE_BADADDRESS. My function call looks like this:</P><P></P><TABLE><TBODY><TR><TD></TD><TD>int nResult = lineMakeCall (lineHandle, &amp;callHandle_tmp, "8002", 0, 0);</TD></TR></TBODY></TABLE><P></P><P>I have hard coded the destination extension 8002 which is a valid extension and is registered via a soft phone. I can call it successfully using other&nbsp; soft phones. Is there some configuration step that I'm missing here?</P><P></P><P>Thanks,</P><P>Ben</P></BODY></HTML> Wed, 21 May 2014 16:24:33 GMT https://community.cisco.com/t5/call-control/linemakecall-failing/m-p/3477578#M793 bhoover02 2014-05-21T16:24:33Z Re: lineMakeCall Failing https://community.cisco.com/t5/call-control/linemakecall-failing/m-p/3477579#M794 <HTML><HEAD></HEAD><BODY><P>I didn't have the dial plan settings correct for my CTI port extension. Once I configured those I was able to get this working.</P></BODY></HTML> Wed, 28 May 2014 13:00:36 GMT https://community.cisco.com/t5/call-control/linemakecall-failing/m-p/3477579#M794 bhoover02 2014-05-28T13:00:36Z