topic TermConnection.getCiscoRecorderInfo() returns null in Call Control https://community.cisco.com/t5/call-control/termconnection-getciscorecorderinfo-returns-null/m-p/3483845#M911 <HTML><HEAD></HEAD><BODY><P>Our CUCM is 10.5 and JTAPI library is of 10.5 CUCM and 64-bit. When I call startRecording API, 2 streams are initiated and landed to our IVR's CTI Port and in ringing state. At this time If application calls TermConnection.getCiscoRecorderInfo() it always returns null. What could be the reason?</P><P></P><P></P><P>Regards,</P><P>Umesh</P><P></P><P></P><P></P><P></P></BODY></HTML> Wed, 11 Feb 2015 03:58:52 GMT upchaurasia 2015-02-11T03:58:52Z TermConnection.getCiscoRecorderInfo() returns null https://community.cisco.com/t5/call-control/termconnection-getciscorecorderinfo-returns-null/m-p/3483845#M911 <HTML><HEAD></HEAD><BODY><P>Our CUCM is 10.5 and JTAPI library is of 10.5 CUCM and 64-bit. When I call startRecording API, 2 streams are initiated and landed to our IVR's CTI Port and in ringing state. At this time If application calls TermConnection.getCiscoRecorderInfo() it always returns null. What could be the reason?</P><P></P><P></P><P>Regards,</P><P>Umesh</P><P></P><P></P><P></P><P></P></BODY></HTML> Wed, 11 Feb 2015 03:58:52 GMT https://community.cisco.com/t5/call-control/termconnection-getciscorecorderinfo-returns-null/m-p/3483845#M911 upchaurasia 2015-02-11T03:58:52Z Re: TermConnection.getCiscoRecorderInfo() returns null https://community.cisco.com/t5/call-control/termconnection-getciscorecorderinfo-returns-null/m-p/3483846#M912 <HTML><HEAD></HEAD><BODY><P>Resolved. Perhaps recording stream calls were not establishing properly.</P></BODY></HTML> Wed, 18 Feb 2015 03:46:26 GMT https://community.cisco.com/t5/call-control/termconnection-getciscorecorderinfo-returns-null/m-p/3483846#M912 upchaurasia 2015-02-18T03:46:26Z