topic Re: Can't update productType attribute using updateUcService request in Management

Can't update productType attribute using updateUcService request

jdrinkwater — Tue, 15 Jan 2019 14:53:02 GMT

Can't update producttype attribute using updateUcService request

<axl:updateUcService xmlns:axl="http://www.cisco.com/AXL/API/12.0">
   <serviceType>Directory</serviceType>
   <productType>Directory</productType>
   <name>222</name>
   </axl:updateUcService>

The response was successful but when you go to cucm server, productType is not changed.

Anyone running into same problem?

Thanks,

Re: Can't update productType attribute using updateUcService request

npetrele — Wed, 08 May 2019 15:28:23 GMT

Hi Jung,

Here's the template for the API:

<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns="http://www.cisco.com/AXL/API/12.5">
<soapenv:Header/>
<soapenv:Body>
<ns:updateUcService sequence="?">

<name>?</name>
<uuid>?</uuid>

<newName>?</newName>

<description>?</description>

<hostnameorip>?</hostnameorip>

<port>?</port>

<protocol>?</protocol>

<ucServiceXml>

</ucServiceXml>
</ns:updateUcService>
</soapenv:Body>
</soapenv:Envelope>

As you can see, there are no serviceType or productType tags. I assume they would go in here:

Re: Can't update productType attribute using updateUcService request

jdrinkwater — Wed, 08 May 2019 15:36:24 GMT

I've tried the following request without Product or Service type but still getting an error.

<axl:updateUcService xmlns:axl="http://www.cisco.com/AXL/API/12.0">
<name>enhanced directory 1</name>
<ucServiceXml>
<UriPrefix></UriPrefix>
</ucServiceXml>
</axl:updateUcService>

<soapenv:Envelope xmlns:soapenv='http://schemas.xmlsoap.org/soap/envelope/'>
<soapenv:Body>
<soapenv:Fault>
<faultcode>soapenv:Server</faultcode>
<faultstring>Invalid value for the UriPrefix</faultstring>
<detail>
<axlError>
<axlcode>5003</axlcode>
<axlmessage>Invalid value for the UriPrefix</axlmessage>
<request>updateUcService</request></axlError></detail></soapenv:Fault></soapenv:Body>
</soapenv:Envelope>

Re: Can't update productType attribute using updateUcService request

dstaudt — Mon, 13 May 2019 19:12:09 GMT

It appears from the 12.0 AXL schema for <updateUcService>, that it is not possible to change the service or product type once the service has been created:

You will likely need to remove and then re-add the service if you need to change one of these types. Note this could have knock-on effects, as I suspect that associations with the existing service will be lost if you remove it and re-add it - even though the name may be the same, the underlying uuid will change...