AXL basic for the following actions

Alfred Sette — Tue, 06 Dec 2022 18:58:15 GMT

Hi - looking for pointers on the following AXL actions:

Create Wx room devices in CUCM
Create new or reuse directory numbers in CUCM
Update user account to associate device, enable Home Cluster and Unified CM IM and Presence, associate primary extension and assign groups

Re: AXL basic for the following actions

dstaudt — Wed, 07 Dec 2022 18:06:51 GMT

This sample should demonstrate the basics for adding a new device, including examples of defining <vendorConfig> options: https://github.com/CiscoDevNet/axl-python-zeep-samples/blob/master/axl_add_Phone_vendorConfig.py

As device <vendorConfig> schemas vary per device and are not definitively documented, usually a good way to figure out what elements are needed is to create a similar device in CUCM admin, then use AXL (e.g. via SoapUI) to retrieve it.

This sample covers adding a new line: https://github.com/CiscoDevNet/axl-python-zeep-samples/blob/master/axl_add_update_Line.py

This one covers adding a user, enabling IM&P, associating device/primary extension/groups: https://github.com/CiscoDevNet/axl-python-zeep-samples/blob/master/axlZeep.py

topic Re: AXL basic for the following actions in Management

AXL basic for the following actions

Re: AXL basic for the following actions