topic Re: Path Trace from DHCP interface? in Controllers https://community.cisco.com/t5/controllers/path-trace-from-dhcp-interface/m-p/3424223#M1044 <HTML><HEAD></HEAD><BODY><P>Got a response that this is on the roadmap for the August APIC-EM release.</P></BODY></HTML> Sat, 26 Mar 2016 04:30:34 GMT Joe Clarke 2016-03-26T04:30:34Z Path Trace from DHCP interface? https://community.cisco.com/t5/controllers/path-trace-from-dhcp-interface/m-p/3424220#M1041 <HTML><HEAD></HEAD><BODY><P>I was exploring the Path Trace feature but can't get it to work with a interface that is set for ip address dhcp.&nbsp; When I select that device, then can select the interface, the DHCP interfaces have an address of 0.0.0.0 and will error out if I select it.&nbsp; Interfaces with a static ip address seem to work fine.&nbsp; Is this a known limitation?</P></BODY></HTML> Fri, 01 Mar 2019 12:27:23 GMT https://community.cisco.com/t5/controllers/path-trace-from-dhcp-interface/m-p/3424220#M1041 thjonson 2019-03-01T12:27:23Z Re: Path Trace from DHCP interface? https://community.cisco.com/t5/controllers/path-trace-from-dhcp-interface/m-p/3424221#M1042 <HTML><HEAD></HEAD><BODY><P>Ha, yes!&nbsp; Glad to hear someone else is seeing this.&nbsp; We ran into the same thing at CiscoLive in Europe.&nbsp; APIC-EM is scraping "show run int" for operational data, and this is why DHCP interfaces do not work in Path Trace.&nbsp; Engineering is aware of this, and I'm hoping the next release will have a solution for it.</P></BODY></HTML> Fri, 25 Mar 2016 20:38:53 GMT https://community.cisco.com/t5/controllers/path-trace-from-dhcp-interface/m-p/3424221#M1042 Joe Clarke 2016-03-25T20:38:53Z Re: Path Trace from DHCP interface? https://community.cisco.com/t5/controllers/path-trace-from-dhcp-interface/m-p/3424222#M1043 <HTML><HEAD></HEAD><BODY><P>Thanks, I just wanted to make sure it wasn't user error on my part.</P></BODY></HTML> Fri, 25 Mar 2016 21:16:15 GMT https://community.cisco.com/t5/controllers/path-trace-from-dhcp-interface/m-p/3424222#M1043 thjonson 2016-03-25T21:16:15Z Re: Path Trace from DHCP interface? https://community.cisco.com/t5/controllers/path-trace-from-dhcp-interface/m-p/3424223#M1044 <HTML><HEAD></HEAD><BODY><P>Got a response that this is on the roadmap for the August APIC-EM release.</P></BODY></HTML> Sat, 26 Mar 2016 04:30:34 GMT https://community.cisco.com/t5/controllers/path-trace-from-dhcp-interface/m-p/3424223#M1044 Joe Clarke 2016-03-26T04:30:34Z