topic APIC-EM discovery issue in Controllers https://community.cisco.com/t5/controllers/apic-em-discovery-issue/m-p/3449660#M1207 <HTML><HEAD></HEAD><BODY><P>Hi there,</P><P>I have recently begun playing with APIC-EM,although it is easy to manage it,I have a problem.</P><P>APIC does not discover devices properly.I have simple topology where apic is connected to R1 and R1 ins connected to R2/R3. RIPv2 runs between routers so networks are reachable.What I noticed that, when I run discover,devices logs&nbsp; %SYS-5-CONFIG_I: Configured from 10.10.10.10 by snmp. Plus,wireshark capture proofs that APIC connects to devices.However I only see R1 as a result of this discovery test.</P><P>Most interestingly,even R1 is not added to Device Inventory list ( may be it must be enabled somehow,but I didnt see such option).</P><P></P><P>Could anyone help me to troubleshoot this issue? I use IP range discovery method (actually I tried CDP as well).</P><P></P><P>P.S APIC is deployed in vm in local network, and hope I ask in right place</P><P></P><P>Thanks in advance,</P></BODY></HTML> Fri, 01 Mar 2019 12:41:13 GMT Kanan Huseynli 2019-03-01T12:41:13Z APIC-EM discovery issue https://community.cisco.com/t5/controllers/apic-em-discovery-issue/m-p/3449660#M1207 <HTML><HEAD></HEAD><BODY><P>Hi there,</P><P>I have recently begun playing with APIC-EM,although it is easy to manage it,I have a problem.</P><P>APIC does not discover devices properly.I have simple topology where apic is connected to R1 and R1 ins connected to R2/R3. RIPv2 runs between routers so networks are reachable.What I noticed that, when I run discover,devices logs&nbsp; %SYS-5-CONFIG_I: Configured from 10.10.10.10 by snmp. Plus,wireshark capture proofs that APIC connects to devices.However I only see R1 as a result of this discovery test.</P><P>Most interestingly,even R1 is not added to Device Inventory list ( may be it must be enabled somehow,but I didnt see such option).</P><P></P><P>Could anyone help me to troubleshoot this issue? I use IP range discovery method (actually I tried CDP as well).</P><P></P><P>P.S APIC is deployed in vm in local network, and hope I ask in right place</P><P></P><P>Thanks in advance,</P></BODY></HTML> Fri, 01 Mar 2019 12:41:13 GMT https://community.cisco.com/t5/controllers/apic-em-discovery-issue/m-p/3449660#M1207 Kanan Huseynli 2019-03-01T12:41:13Z