topic Re: deployed C3560CX switch became 'unclaimed' in Controllers

deployed C3560CX switch became 'unclaimed'

Guangming_Li — Fri, 01 Mar 2019 12:38:52 GMT

Hi There,

We deployed a couple of Cisco C3560CX switch via APIC-EM P&P a couple of weeks ago, recently those switches status became 'unclaimed' after I upgrade APIC-EM from 1.3.2.37 to 1.4.3.1009. Please check the event of one of the switch below: may i know why? how can we fix it?

Thanks in advance.

2017-06-21 10:23:45 (W. Australia Standard Time)	Device authentication status has changed to Unauthenticated(SUDI feature not supported by device)
2017-06-20 17:22:01 (W. Australia Standard Time)	Device authentication status has changed to Unauthenticated(SUDI feature not supported by device)
2017-06-20 14:10:59 (W. Australia Standard Time)	UNCLAIMED
2017-06-20 14:09:56 (W. Australia Standard Time)	Received new work request from Agent while expecting work response. Retrying operation RETRIEVING_IP_ADDRESSES_PRE_CONFIG
2017-06-20 14:08:14 (W. Australia Standard Time)	Received new work request from Agent while expecting work response. Retrying operation FILESYSTEM_INFO_REQUESTED
2017-06-20 14:06:32 (W. Australia Standard Time)	Device authentication status has changed to Unauthenticated(SUDI feature not supported by device)
2017-06-20 14:06:31 (W. Australia Standard Time)	Device first contact
2017-06-14 14:06:05 (W. Australia Standard Time)	Device authentication status has changed to Unauthenticated(SUDI feature not supported by device)
2017-04-23 11:19:34 (W. Australia Standard Time)	Device was successfully deployed!!
2017-04-23 11:18:13 (W. Australia Standard Time)	Save startup Configuration was performed successfully

Re: deployed C3560CX switch became 'unclaimed'

ddeitsch1 — Fri, 23 Jun 2017 17:19:25 GMT

Not sure how to go about fixing it, it looks like the device status in the DB was somehow reset during the upgrade of APIC-EM.

Is it necessary that the device show up in the PnP screens at all? If not I would think you can just delete it and do a regular discovery to manage it. Would that meet your needs?

Re: deployed C3560CX switch became 'unclaimed'

Guangming_Li — Thu, 29 Jun 2017 02:47:31 GMT

Thanks David.

Unfortunately we still got same issue after rediscovery. Please check history info from one of the equipment. Anyone can help?

2017-06-28 09:01:01 (W. Australia Standard Time)

UNCLAIMED

2017-06-28 08:57:42 (W. Australia Standard Time)

Received new work request from Agent while expecting work response. Retrying operation FILESYSTEM_INFO_REQUESTED

2017-06-28 08:55:59 (W. Australia Standard Time)

Device authentication status has changed to Unauthenticated(SUDI feature not supported by device)

2017-06-28 08:55:58 (W. Australia Standard Time)

Device first contact

2017-06-28 08:55:00 (W. Australia Standard Time)

Device was Un-Ignored and moved from Ignored State to Unclaimed state

2017-06-28 06:54:44 (W. Australia Standard Time)

Device was moved to Ignored state

2017-06-21 14:40:08 (W. Australia Standard Time)

UNCLAIMED

2017-06-21 14:36:49 (W. Australia Standard Time)

Received new work request from Agent while expecting work response. Retrying operation FILESYSTEM_INFO_REQUESTED

2017-06-21 14:35:05 (W. Australia Standard Time)

Device authentication status has changed to Unauthenticated(SUDI feature not supported by device)

2017-06-21 14:35:04 (W. Australia Standard Time)

Cheers,

Bright

Re: deployed C3560CX switch became 'unclaimed'

ddeitsch1 — Thu, 29 Jun 2017 04:41:51 GMT

So is the 3560 just sitting there with no configuration now or does it have the configuration that was pushed from APIC-EM 1.3 when it worked the first time?

Re: deployed C3560CX switch became 'unclaimed'

Guangming_Li — Thu, 29 Jun 2017 04:45:08 GMT

They all got the configuration that was pushed from APIC-EM 1.3 and worked very well.

They are still online and doing their job, but APIC-EM 1.4 keep saying they are unclaimed ☺

Re: deployed C3560CX switch became 'unclaimed'

ddeitsch1 — Thu, 29 Jun 2017 04:49:03 GMT

I am guessing at this point, but I think the database, for whatever reason, lost that it was already provisioned, and since it is already provisioned, it is not going through the process that it normally would. Is there any issue with just deleting it from the PnP project? At least that way you son't have to stare at it saying Unclaimed 🙂

Re: deployed C3560CX switch became 'unclaimed'

Guangming_Li — Thu, 29 Jun 2017 05:11:32 GMT

The problem is that it will come back after second every time when I deleted them from PnP project.

I just worried some guys accidently claim those equipment and break the switches. Now I have to lockdown all other users access to APIC-EM just in case. It’s very annoyed.

Cheers,

Bright

Re: deployed C3560CX switch became 'unclaimed'

ddeitsch1 — Thu, 29 Jun 2017 05:22:48 GMT

Ahhh, ok, yeah I get it now. Yeah, I would bet that the database is corrupt, which I saw after my upgrade from1.3 to 1.4 as well. I did a reset grapevine to fix it, but that can be super annoying. Maybe open a TAC case and if they have any tricks up their sleeve?

Re: deployed C3560CX switch became 'unclaimed'

Guangming_Li — Thu, 29 Jun 2017 05:27:08 GMT

LOL, I thought you are TAC engineer.

If I can’t get answer from here, I will log a TAC.

Thanks mate.

Re: deployed C3560CX switch became 'unclaimed'

aradford — Thu, 29 Jun 2017 12:03:43 GMT

Hi Bright,

did you try to "ignore" the device in the unclaimed list?

Adam