topic Re: Problem while deploying IWAN app - GUI bugs in Controllers

Problem while deploying IWAN app - GUI bugs

dgombovic — Fri, 01 Mar 2019 12:28:13 GMT

Hello,

while I was deploying IWAN app few bugs happened;

1) can't change or delete IP Adress Pools

2) Can't configure HUB or "Save & Continue"

Tried with Firefox, Chrome and Opera, APIC-EM version 1.1.2.15.

How to solve that problems in order to continue with IWAN traffic-routing app development?

Thank you in advance

Re: Problem while deploying IWAN app - GUI bugs

dgombovic — Thu, 12 May 2016 07:53:23 GMT

As some script in GUI is constantly failing when clicking on configure hub icon and as even clean install of APIC-EM didn't help, is there any way to deploy IWAN with API?

Re: Problem while deploying IWAN app - GUI bugs

dgombovic — Wed, 18 May 2016 11:13:02 GMT

Hello again,

is it known GUI-bug in 1.1.2.15 or is something else wrong?

Thank you in advance!

Re: Problem while deploying IWAN app - GUI bugs

Geevarghese Cheria — Wed, 18 May 2016 11:31:22 GMT

Hi Dominik,

Apologies for the delay in responding to you. what I think is that It is important to size the generic IP pool correctly for the long term needs of the IWAN site. VPN requirements dictate that subnets must be defined and allocated internally (up front) before any sites are provisioned. Therefore, once the site and service provider sizing is set, it is frozen for the life of the controller.

Reference - Software Configuration Guide for Cisco IWAN on APIC-EM - Configure Hub Site and Settings [Cisco Application Policy Infra…

Thanks and Regards,

Geevarghese

Re: Problem while deploying IWAN app - GUI bugs

dgombovic — Wed, 18 May 2016 14:03:34 GMT

Thank You for reply.

IP pool is correctly sized for current lab use so my first concern is solved.

But the main problem is shown on three last picutres that show GUI problem (when trying to access Hub settings) that prevents me to deploy IWAN app. Some script is constantly failing (even clean install of APIC-EM didn't help) and I can't pass that step to deploy app.

Is there any solution to that problem?

Thank You in advance!

p.s. in case that we increase number of branch sites (for examples with merging two companies) what should we do with the APIC-EM IWAN application regarding IP pool changes?

Re: Problem while deploying IWAN app - GUI bugs

dgombovic — Mon, 23 May 2016 07:02:40 GMT

Hello,

any news about GUI problem/bug?

Thank you in advance

Re: Problem while deploying IWAN app - GUI bugs

aradford — Mon, 23 May 2016 07:36:34 GMT

sorry for what may be a silly question.

I assume you have a routing protocol already configured on the HUB routers? What is it?

Re: Problem while deploying IWAN app - GUI bugs

dgombovic — Mon, 23 May 2016 12:00:21 GMT

Yes, OSPF.

Re: Problem while deploying IWAN app - GUI bugs

aradford — Mon, 23 May 2016 22:12:14 GMT

Have you clicked on the "+" in the top left corner of the HUB to configure your DC parameters? That is where you supply the routing protocol, AS, and DC prefixes. It looks like you have not done that yet.

Re: Problem while deploying IWAN app - GUI bugs

aradford — Wed, 25 May 2016 00:11:33 GMT

We need to give you a better error message when the DC parameters have not been configured (top left corner). Can you test this please?

Re: Problem while deploying IWAN app - GUI bugs

dgombovic — Mon, 30 May 2016 08:17:52 GMT

Problems happen after clicking on that "+" that configures Hub.

(second set of pictures in the first post is after clicking that "+")

Thank You for your time!

Re: Problem while deploying IWAN app - GUI bugs

aradford — Mon, 30 May 2016 23:59:45 GMT

I am really sorry, I have done this lots of times with no issues. Just to be completely clear, you did click on the plus in this image?

Re: Problem while deploying IWAN app - GUI bugs

dgombovic — Tue, 31 May 2016 12:45:06 GMT

No need to be sorry

Yes, when i click that "+" problems start.

Version is 1.1.2.15 and even clean install didn't help. (Neither did installations of other browsers)

Re: Problem while deploying IWAN app - GUI bugs

rnaggi — Tue, 31 May 2016 16:36:11 GMT

Regarding Issue 1 :

(A) With the current Release 1.2 ( 1.2.0.1594 ) , End user should be able to delete the LAN type of IP address pool.

(B) Generic IP Pool type cannot be deleted. End user will have to keep the network requirement in mind and select Generic IP Pool.

Re: Problem while deploying IWAN app - GUI bugs

rnaggi — Tue, 31 May 2016 16:49:01 GMT

Regarding Issue 2:

As "aradford" mentioned,

Before clicking on SAVE and Continue , You need to make sure to fill out the following in order to click in SAVE and Continue.

(A) All the devices in this case ( Border Router , Master Controller)

(B) WAN Cloud

(D) DC Prefix ( by clicking on + sign )

Once (A) , (B) , (C) and (D) are filled up --> click on SAVE and Continue --> summary Page will show you the information entered. -- > you will have a choice to schedule or provision the network.

hope this helps

Re: Problem while deploying IWAN app - GUI bugs

dgombovic — Wed, 01 Jun 2016 11:05:15 GMT

I did (A) and (B) before (D) that freezes GUI like in pictures.

Where can I choose (C) Routing Protocol in GUI before clicking on "+" barrel sign that is located left of "HUB" text?

Re: Problem while deploying IWAN app - GUI bugs

aradford — Wed, 01 Jun 2016 11:26:23 GMT

You need to click on "+" to select the routing protocol. Here is an example:

Re: Problem while deploying IWAN app - GUI bugs

dgombovic — Wed, 01 Jun 2016 11:47:33 GMT

It looks like we are going around in the circle.

That + (that is on "barrel" image and is next to HUB sign on the left side) freezes my APIC-EM GUI (I get notification from browser that it is waiting for some script) and after some time looks like this, which i posted before

https://communities.cisco.com/servlet/JiveServlet/showImage/2-214720-95302/APIC_IWAN_+001.JPG

Re: Problem while deploying IWAN app - GUI bugs

rnaggi — Wed, 01 Jun 2016 17:32:41 GMT

Could you try using Google chrome for configuring DC site (A), (B), (C) , (D) . I have tried using google chrome and is working for me.

Do let me know what browser and version you are using. I will also try to reproduce the same on my end.

Re: Problem while deploying IWAN app - GUI bugs

dgombovic — Thu, 02 Jun 2016 14:00:01 GMT

Unfortunately I have already tried with Google Chrome and I got the same result.

Dominik Gombovic wrote:
...
Tried with Firefox, Chrome and Opera, APIC-EM version 1.1.2.15.
...