topic Catalyst Stacks - Licensing in Controllers

Catalyst Stacks - Licensing

Claudia de Luna — Fri, 01 Mar 2019 12:36:04 GMT

Hi,

We are using the APIC-EM controller to stage a number of 3650 and 3850 stacks and standalone switches.

We want to set the licensing on each switch (stack or standalone). It looks like the licensing is part of the stack configuration and even though we set it in the project file, the standalone switches did not take the licensing (as we defined it in the project file).

Is there a trick to that?

Here is an example of the project file e are using:

We are going to try putting a "1" in Stack Member Count on the next batch to see if it makes a difference.

Serial Number/Mac Address(AP only)	Device Name*	Product ID*	Config Name	Bootstrap	Image Name	Device Certificate*	SUDI Required*	Stack Member Count	License Level	EULA Accepted
FCW2048***	FCW2048***	WS-C3850-48U	cat3k_caa-universalk9.16.02.02.SPA.bin	TRUE	FALSE	ipservices	TRUE

Re: Catalyst Stacks - Licensing

aradford — Mon, 06 Feb 2017 20:28:15 GMT

Hi Claudia,

there was another thread on this. Licences only apply in stacks.

The reason is that if the licences are different on stack members, the stack will break into groups, so we needed to fix it there.

Today, licensing is different on various platforms (routers, switches etc), so it is difficult to apply a general licensing scheme to all single member devices.

In future this will change.

Adam

Re: Catalyst Stacks - Licensing

Claudia de Luna — Mon, 06 Feb 2017 21:43:25 GMT

Sorry I didn't catch that other thread! Totally get why its important in stacks but its also important on standalones. Tired another batch with stack members set to 1. Licensing didn't take and the provisioning never completed (they are all stuck in "Deploying Image".

So don't use stack member = 1 to try to fake out the controller into applying the licensing

Got it... Thanks!

2017-02-06 12:45:57 (Pacific Standard Time)	Device authentication status has changed to None
2017-02-06 12:32:42 (Pacific Standard Time)	Image upgrade was performed successfully
2017-02-06 12:08:59 (Pacific Standard Time)	UNCLAIMED
2017-02-06 12:08:48 (Pacific Standard Time)	Received new work request from Agent while expecting work response. Retrying operation RETRIEVING_IP_ADDRESSES_PRE_CONFIG
2017-02-06 12:08:14 (Pacific Standard Time)	Received new work request from Agent while expecting work response. Retrying operation FILESYSTEM_INFO_REQUESTED
2017-02-06 12:08:09 (Pacific Standard Time)	Device authentication status has changed to Authenticated
2017-02-06 12:07:36 (Pacific Standard Time)	Device first contact