topic Re: Method to return more than 500 devices in API GET "network-device" in Controllers

Method to return more than 500 devices in API GET "network-device"

bruce.maurer — Fri, 01 Mar 2019 12:39:34 GMT

Small question to the community. I've got 1400 devices in my device inventory and looking periodically pulls a current "status" of all devices. The challenge is the 500 record return limit. Is there an API method of paging or setting an alternative "max limit" size similar to Cisco Prime?

Thanks in advance.

Re: Method to return more than 500 devices in API GET "network-device"

aradford — Mon, 17 Jul 2017 06:15:19 GMT

Hi Bruce,

APIC-EM API support pagination, so you can as for the next 200 (for example, with a max of 500) as

/api/v1/network-device/501/200

{index}/{count}

Re: Method to return more than 500 devices in API GET "network-device"

bruce.maurer — Tue, 18 Jul 2017 18:03:28 GMT

Thank you and this works for what I'm needing to do.

Re: Method to return more than 500 devices in API GET "network-de

Pranav Mhatre — Mon, 11 Oct 2021 12:43:31 GMT

Hello Adam,

Limitation of 500 is applicable to Host as well?

So if I understand correctly even using below API call I can extract information of only 500 Users in 1 API call due to limit of 500?

https:/DNA IP/dna/api/v1/host

Is there any possibility to extract information of all end users in 1 API call in DNAC 2.1.X Release? or Is there any other way to increase this limit of 500?

Also can you please confirm whether below API call is not supported any more in DNAC version 1.3.X onwards?

https://DNA IP/api/assurance/v1/host