configuration manipulation with APIC-EM

Cristian Ruta — Fri, 01 Mar 2019 12:25:01 GMT

Hello,

I am trying out the API of APIC-EM and I encounter problems in updating interface fields like : IP/mask, speed/duplex, description, mode.

Here is an example:

The POST body is:

[{

"ipv4Address": "10.10.30.1",

"ipv4Mask": "30",

"id": "edbc9c9c-eef9-4f57-a6bd-4f07c902b557"

}

]

Request URL

https://10.10.10.107:443/api/v0/interface

Response Body

{ "response": { "taskId": "917c54d5-0bd6-4b53-a04e-56822837ebed", "url": "/api/v0/task/917c54d5-0bd6-4b53-a04e-56822837ebed" }, "version": "0.0" }

Task is ok:

Request URL

https://10.10.10.107:443/api/v0/task/917c54d5-0bd6-4b53-a04e-56822837ebed

Response Body

{ "response": { "id": "917c54d5-0bd6-4b53-a04e-56822837ebed", "rootId": "917c54d5-0bd6-4b53-a04e-56822837ebed", "serviceType": "Inventory service", "progress": "Interface updated successfully #edbc9c9c-eef9-4f57-a6bd-4f07c902b557 ", "startTime": 1430148662699, "endTime": 1430148662725 }, "version": "0.0" }

With GET we see the updated info, also in the GUI

result is: {

"version": "0.0",

"response": {

"ipv4Address": "10.10.30.1",

"macAddress": "FC:5B:39:D4:4C:01",

"vendor": "Cisco",

"ipv4Mask": "30",

"duplex": true,

"serialNo": "FGL183710LP",

"pid": "ISR4451-X/K9",

"lastUpdated": "2015-04-27 15:30:12.629034+00",

"status": "up",

"numUpdates": 534,

"interfaceType": "Physical",

"deviceId": "5a89d2c4-9613-4a2e-900a-4122a900788a",

"portName": "GigabitEthernet0/0/1",

"portType": "ISR4451-X-4x1GE",

"ospfSupport": true,

"connectorType": "RJ-45",

"id": "edbc9c9c-eef9-4f57-a6bd-4f07c902b557",

"speed": 1000000,

"avgUpdateFrequency": 181

}

BUT in reality, the configuration on the network element is not updated:

ISR4451X-B#sh run int gi 0/0/1

Building configuration...

Current configuration : 194 bytes

interface GigabitEthernet0/0/1

description P2P link to 3560-X

ip address 10.10.30.65 255.255.255.252

speed 1000

no negotiation auto

service-policy input PM

service-policy output PM

end

ISR4451X-B#sh ip int gi 0/0/1

GigabitEthernet0/0/1 is up, line protocol is up

Internet address is 10.10.30.65/30

Broadcast address is 255.255.255.255

Is there a specific issue or I am not doing it in the right way?

I have also tried to delete and post a new interface but still does not work.

Thank you,

Cristian Ruta

ruta.cristian@gmail.com

Re: configuration manipulation with APIC-EM

yawming — Mon, 11 May 2015 22:03:22 GMT

The /interface API is NOT for changing device state

topic configuration manipulation with APIC-EM in Controllers

configuration manipulation with APIC-EM

Request URL

Response Body

Request URL

Response Body

Re: configuration manipulation with APIC-EM