topic Re: APIC-EM EFT2 in Controllers

APIC-EM EFT2

flah.ibtissam1 — Fri, 01 Mar 2019 12:25:09 GMT

Hello,

I am new in devnet, i am interested in the Apic-em EFT lab but i need to understand the network topology before configuring the Apic controller. I'll be grateful if you give me more détails about the network( caracteristics, purpose...) and the devices used on it.

Re: APIC-EM EFT2

yawming — Fri, 15 May 2015 01:29:48 GMT

First I will go to Cisco APIC Enterprise Module to go through APIC-EM overview

After that you can go to Cisco Sandbox APIC-EM lab. Once you have lab you can go to APIC-EM UI to check ot network topology, device inventory and configuration ...tec

Re: APIC-EM EFT2

flah.ibtissam1 — Mon, 18 May 2015 14:20:50 GMT

Thank you yawchen for the answer.

Actually, i've done all of this but I think the description of network topology is insuffisient !

I can't understand the use of these routers ( 2811A, 2811B and 2811C). Can you please give some ideas ?

Re: APIC-EM EFT2

yawming — Mon, 18 May 2015 19:18:56 GMT

Not quite sure what exactly you need. can you please provide more detail ?

Re: APIC-EM EFT2

flah.ibtissam1 — Tue, 19 May 2015 08:32:10 GMT

I want to know more details about the network architecture, I mean Is it a LAN network ? If so, what is the role of 2811A, 2811B and 2811C routers ? Are they used to seperate subnets or for other purpose ? and what is the utility of VLANs in this case ?

I hope you give me a scenario for the network and thank you.

Re: APIC-EM EFT2

yawming — Tue, 19 May 2015 16:14:48 GMT

Please see this post.

Sorry, this question is more related Sandbox lab may need Sandbox admin to help answering

Re: APIC EM EFT 2 Help

Re: APIC-EM EFT2

flah.ibtissam1 — Wed, 20 May 2015 12:25:55 GMT

Ok but how can I have contact with Sandbox admin ?

Re: APIC-EM EFT2

yawming — Wed, 20 May 2015 19:20:42 GMT

Post here -- DevNet Sandbox

Thanks !

Re: APIC-EM EFT2

ecorban — Wed, 20 May 2015 20:27:55 GMT

the APIC-EM sandbox topology is an based upon an sample enterprise network. please reserve one of the hardware based labs to get an access to network topology. For the large APIC-EM lab, the main-sw is vrfed and traffic is routed via the admin BGP cloud.please use the APIC-EM controller to review the running configuration of the nodes within the topology.