topic Re: Getting "inconsistent value: Device refused one or more comma in Tools

Getting "inconsistent value: Device refused one or more commands" when trying to configure interface using RESTCONF

mohanconnects — Fri, 11 Dec 2020 07:43:20 GMT

Hello,

When trying to configure CAT9K switch interface via RESTCONF, getting device refused one or more commands error, provided below the tried steps.

Used POSTMAN tool.

Get the individual interface details.

GET https://192.168.43.2/restconf/data/Cisco-IOS-XE-native:native/interface/GigabitEthernet=1%2F0%2F14

GET response.

{
  "Cisco-IOS-XE-native:GigabitEthernet": {
    "name": "1/0/14"
  }
}

Tried to Configure the same interface using PUT method.

PUT https://192.168.43.2/restconf/data/Cisco-IOS-XE-native:native/interface/GigabitEthernet=1%2F0%2F14

Body - raw - JSON

{
  "Cisco-IOS-XE-native:GigabitEthernet": {
    "name": "1/0/14",
    "ip": {
      "address": {
        "primary": {
          "address": "87.1.1.10",
          "mask": "255.255.255.0"
        }
      }
    }
  }
}

PUT Response

{
  "errors": {
    "error": [
      {
        "error-message": "inconsistent value: Device refused one or more commands",
        "error-path": "/Cisco-IOS-XE-native:native/interface/GigabitEthernet=\"1/0/14\"",
        "error-tag": "invalid-value",
        "error-type": "application"
      }
    ]
  }

Tried to Configure the same interface using Patch method.

PATCH https://192.168.43.2/restconf/data/Cisco-IOS-XE-native:native/interface/GigabitEthernet

Body - raw - JSON

{
  "Cisco-IOS-XE-native:GigabitEthernet": {
    "name": "1/0/14",
    "ip": {
      "address": {
        "primary": {
          "address": "87.1.1.10",
          "mask": "255.255.255.0"
        }
      }
    }
  }
}

PATCH Response

{
  "errors": {
    "error": [
      {
        "error-message": "inconsistent value: Device refused one or more commands",
        "error-path": "/Cisco-IOS-XE-native:native/interface/GigabitEthernet",
        "error-tag": "invalid-value",
        "error-type": "application"
      }
    ]
  }
}

Are the PUT, PATCH URI are correct?

How to configure the interface?

Thanks,

Mohan

Re: Getting "inconsistent value: Device refused one or more commands" when trying to configure interface using RESTCONF

yangorelik — Sun, 13 Dec 2020 21:46:16 GMT

Hi Mohan

For PUT or PATCH commands, when some raw JSON attributed, try this command:

PUT https://192.168.43.2/restconf/data

Body - raw - JSON

{
  "Cisco-IOS-XE-native:GigabitEthernet": {
    "name": "1/0/14",
    "ip": {
      "address": {
        "primary": {
          "address": "87.1.1.10",
          "mask": "255.255.255.0"
        }
      }
    }
  }
}

Re: Getting "inconsistent value: Device refused one or more comma

yaojinjie022 — Mon, 30 May 2022 02:58:13 GMT

Dear Mohan,

I encontered the similar problem,I want to dive into it.

I run GET, phenomenal below, when I modify telnet to ssh or append ,"ssh" after "telent" ,run PATCH , okay no problem, respone 204,check the configration on device,show ssh appended, but if I modify telnet to none or all, got respone 400,Bad request.

{

"Cisco-IOS-XE-native:vty": [

{

"first": 0,

"last": 4,

"transport": {

"input": {

"input": ["telnet"]

}

{

"first": 5,

"last": 6,

"transport": {

"input": {

"input": ["none"]

}

]

}

At last try Mr. Gorelik's method, failed, if you found solution, please leave a message, thank you.

kindly regards,

yours sincerely

Yao,Eric

Re: Getting "inconsistent value: Device refused one or more comma

yaojinjie022 — Tue, 31 May 2022 01:40:20 GMT

Greeting Yan,

I had to say sorry,

It is working by run PUT use the upper tier of the API, amazing!

THANKS FOR YOUR SHARE!!!

MANY THANKS!

All the best

Yao, Eric

Re: Getting "inconsistent value: Device refused one or more comma

ygorelik — Thu, 02 Jun 2022 16:12:53 GMT

I believe you are missing top level containers in your payload. There should be something like this:

{
"Cisco-IOS-XE-native:native": {
"line": {
"vty": [
{
"first": 0,
"last": 4,
"transport": {
"input": {
"input": [
"telnet"
]
}
}
},
{
"first": 5,
"last": 6,
"transport": {
"input": {
"input": [
"none"
]
}
}
}
]
}
}
}

Yan

Re: Getting "inconsistent value: Device refused one or more comma

yaojinjie022 — Mon, 06 Jun 2022 08:58:50 GMT

Thanks very much! All done.

Yao