ydk-cpp: openconfig interfaces issues

hariharan.a — Tue, 24 Oct 2017 17:47:10 GMT

Hi,

I am geting segfault when doing a read query for interfaces using ydk_openconfig 1.4.1. IOS-XRv is 6.1.2 version.

[root@nclinux ydk]# rpm -qa | grep ydk

libydk-0.6.1-1.x86_64

libydk-ietf-0.1.3-1.x86_64

libydk-openconfig-0.1.4-1.x86_64

[root@nclinux ydk]# ./a.out ssh://packet:packet@10.66.4.203:830 -v

[2017-10-24 13:35:24.253] [ydk] [info] Path where models are to be downloaded: /root/.ydk/10.66.4.203:830

[2017-10-24 13:35:24.262] [ydk] [info] Connected to 10.66.4.203 on port 830 using ssh with timeout of -1

[2017-10-24 13:35:24.262] [ydk] [info] Executing CRUD config read operation

[2017-10-24 13:35:24.269] [ydk] [info] =============Generating payload to send to device=============

[2017-10-24 13:35:24.269] [ydk] [info] <rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"><get-config xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">

</source>

</get-config>

</rpc>

[2017-10-24 13:35:24.269] [ydk] [info]

[2017-10-24 13:35:24.554] [ydk] [info] =============Reply payload received from device=============

[2017-10-24 13:35:24.554] [ydk] [info] <?xml version="1.0"?>

<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="1">

<data>

<name>Loopback0</name>

<name>Loopback0</name>

<type xmlns:idx="urn:ietf:params:xml:ns:yang:iana-if-type">idx:softwareLoopback</type>

</config>

<prefix-length>32</prefix-length>

</config>

</address>

</ipv4>

</subinterface>

</subinterfaces>

</interface>

<name>tunnel-ip1</name>

<name>tunnel-ip1</name>

<type xmlns:idx="urn:ietf:params:xml:ns:yang:iana-if-type">idx:tunnel</type>

</config>

<prefix-length>30</prefix-length>

</config>

</address>

</ipv4>

</subinterface>

</subinterfaces>

</interface>

<name>MgmtEth0/0/CPU0/0</name>

<name>MgmtEth0/0/CPU0/0</name>

<type xmlns:idx="urn:ietf:params:xml:ns:yang:iana-if-type">idx:ethernetCsmacd</type>

</config>

<auto-negotiate>false</auto-negotiate>

</config>

</ethernet>

<prefix-length>24</prefix-length>

</config>

</address>

</ipv4>

</subinterface>

</subinterfaces>

</interface>

<name>GigabitEthernet0/0/0/0</name>

<name>GigabitEthernet0/0/0/0</name>

<type xmlns:idx="urn:ietf:params:xml:ns:yang:iana-if-type">idx:ethernetCsmacd</type>

</config>

<auto-negotiate>false</auto-negotiate>

</config>

</ethernet>

<prefix-length>24</prefix-length>

</config>

</address>

</ipv4>

</subinterface>

</subinterfaces>

</interface>

<name>GigabitEthernet0/0/0/1</name>

<name>GigabitEthernet0/0/0/1</name>

<type xmlns:idx="urn:ietf:params:xml:ns:yang:iana-if-type">idx:ethernetCsmacd</type>

</config>

<auto-negotiate>false</auto-negotiate>

</config>

</ethernet>

<prefix-length>24</prefix-length>

</config>

</address>

</ipv4>

</subinterface>

</subinterfaces>

</interface>

<name>GigabitEthernet0/0/0/2</name>

<name>GigabitEthernet0/0/0/2</name>

<type xmlns:idx="urn:ietf:params:xml:ns:yang:iana-if-type">idx:ethernetCsmacd</type>

</config>

<auto-negotiate>false</auto-negotiate>

</config>

</ethernet>

<prefix-length>24</prefix-length>

</config>

</address>

</ipv4>

</subinterface>

</subinterfaces>

</interface>

</interfaces>

</data>

</rpc-reply>

[2017-10-24 13:35:24.554] [ydk] [info]