topic Re: YDK-Py installation made super simple! in Tools

YDK-Py installation made super simple!

saalvare — Fri, 24 Mar 2017 18:48:13 GMT

Starting with release 0.5.4, YDK-PY is now part of the Python package index (PyPi). This means a dramatically simpler installation experience. Instead of downloading/cloning the YDK-Py code, building source packages and installing them in a particular order, you can just use the pip utility to automate the installation. Previously, a full installation of YDK-Py (YDK core package, plus XR/OpenConfig/IETF) could take 12 steps. Now, you just need to issue:

$ pip install ydk-models-cisco-ios-xr

If you already have YDK-Py installed and want to upgrade:

$ pip install ydk-models-cisco-ios-xr --upgrade

That's it. That simple!

The installation process takes care of pulling all Python dependencies and install them for you. Take into account that Python packaging doesn't handle system dependencies. That is, non-python libraries and packages required by YDK-Py or by Python packages that YDK-Py uses. You still need to install those system dependencies the first time you use YDK-Py. See our updated installation instructions in the YDK-Py documentation.

Let's get hacking!

Re: YDK-Py installation made super simple!

sofitapaul — Sat, 01 Apr 2017 11:14:54 GMT

How much time it will take to update?

$ pip install ydk-models-cisco-ios-xr --upgrade

for me it is taking more than 45 mins

Re: YDK-Py installation made super simple!

abhirame — Sun, 02 Apr 2017 05:52:58 GMT

That is interesting. Are you using a virtualenv? Which OS?

Re: YDK-Py installation made super simple!

saalvare — Tue, 04 Apr 2017 19:40:54 GMT

Is it getting stuck for you? or you're able to verify progress and validate installation after 45min? Please share as many details about your environment as possible. The longest it's taken for me is about 2.5 minutes. In that case, I had a VPN session over a slow overseas Internet connection.

Re: YDK-Py installation made super simple!

baalagar — Wed, 19 Apr 2017 10:20:16 GMT

Hi ,

i am getting error like below , even i set proxy ... any idea how to fix ?

i used this proxy :source /auto/pyats/bin/lab_proxy.sh

[exec] baalagar@nkaliape-lnx-v1%>pip install ydk-models-cisco-ios-xr

Requirement already satisfied: ydk-models-cisco-ios-xr in /auto/cafy_dev/cafykit/exec/lib/python3.4/site-packages

Requirement already satisfied: ydk-models-ietf>=0.1.1 in /auto/cafy_dev/cafykit/exec/lib/python3.4/site-packages (from ydk-models-cisco-ios-xr)

Requirement already satisfied: enum34==1.1.3 in /auto/cafy_dev/cafykit/exec/lib/python3.4/site-packages (from ydk-models-cisco-ios-xr)

Requirement already satisfied: ydk>=0.5.2 in /auto/cafy_dev/cafykit/exec/lib/python3.4/site-packages (from ydk-models-cisco-ios-xr)

Requirement already satisfied: lxml==3.4.4 in /auto/cafy_dev/cafykit/exec/lib/python3.4/site-packages (from ydk-models-cisco-ios-xr)

Requirement already satisfied: ydk-models-openconfig>=0.1.2 in /auto/cafy_dev/cafykit/exec/lib/python3.4/site-packages (from ydk-models-cisco-ios-xr)

Requirement already satisfied: ncclient>=0.4.7 in /auto/cafy_dev/cafykit/exec/lib/python3.4/site-packages (from ydk-models-cisco-ios-xr)

Requirement already satisfied: ecdsa==0.13 in /auto/cafy_dev/cafykit/exec/lib/python3.4/site-packages (from ydk-models-ietf>=0.1.1->ydk-models-cisco-ios-xr)

Collecting paramiko==1.15.2 (from ydk-models-ietf>=0.1.1->ydk-models-cisco-ios-xr)

Retrying (Retry(total=4, connect=None, read=None, redirect=None)) after connection broken by 'NewConnectionError('<pip._vendor.requests.packages.urllib3.connection.VerifiedHTTPSConnection object at 0x7fa777ecd278>: Failed to establish a new connection: [Errno 101] Network is unreachable',)': /simple/paramiko/

Retrying (Retry(total=3, connect=None, read=None, redirect=None)) after connection broken by 'NewConnectionError('<pip._vendor.requests.packages.urllib3.connection.VerifiedHTTPSConnection object at 0x7fa777ecd588>: Failed to establish a new connection: [Errno 101] Network is unreachable',)': /simple/paramiko/

Retrying (Retry(total=2, connect=None, read=None, redirect=None)) after connection broken by 'NewConnectionError('<pip._vendor.requests.packages.urllib3.connection.VerifiedHTTPSConnection object at 0x7fa777f3d9e8>: Failed to establish a new connection: [Errno 101] Network is unreachable',)': /simple/paramiko/

Retrying (Retry(total=1, connect=None, read=None, redirect=None)) after connection broken by 'NewConnectionError('<pip._vendor.requests.packages.urllib3.connection.VerifiedHTTPSConnection object at 0x7fa777f3d8d0>: Failed to establish a new connection: [Errno 101] Network is unreachable',)': /simple/paramiko/

Retrying (Retry(total=0, connect=None, read=None, redirect=None)) after connection broken by 'NewConnectionError('<pip._vendor.requests.packages.urllib3.connection.VerifiedHTTPSConnection object at 0x7fa777f384e0>: Failed to establish a new connection: [Errno 101] Network is unreachable',)': /simple/paramiko/

Could not find a version that satisfies the requirement paramiko==1.15.2 (from ydk-models-ietf>=0.1.1->ydk-models-cisco-ios-xr) (from versions: )

No matching distribution found for paramiko==1.15.2 (from ydk-models-ietf>=0.1.1->ydk-models-cisco-ios-xr)

[exec] baalagar@nkaliape-lnx-v1%>

Re: YDK-Py installation made super simple!

einarnn — Wed, 19 Apr 2017 10:32:01 GMT

Bala,

Can you verify http/https connection to other websites with the proxy config you have?

Cheers,

Einar

Re: YDK-Py installation made super simple!

baalagar — Mon, 24 Apr 2017 04:30:40 GMT

yes http and https connection went fine .

[exec] baalagar@nkaliape-lnx-v1%>ping www.cisco.com

PING origin-www.cisco.com (173.37.145.84) 56(84) bytes of data.

64 bytes from www2.cisco.com (173.37.145.84): icmp_seq=1 ttl=242 time=42.9 ms

64 bytes from www2.cisco.com (173.37.145.84): icmp_seq=2 ttl=242 time=42.5 ms

64 bytes from www2.cisco.com (173.37.145.84): icmp_seq=3 ttl=242 time=42.5 ms

Re: YDK-Py installation made super simple!

einarnn — Mon, 24 Apr 2017 13:30:55 GMT

ICMP traffic is not dealt with by an HTTP proxy and Cisco websites are usually not routed via the lab proxies. Can you use curl or wget with external websites?

on lab machines I usually use proxy.esl.cisco.com:80<http://proxy.esl.cisco.com:80> as the setting and that works fine. For example:

export http_proxy=http://proxy.esl.cisco.com:80/

export https_proxy=http://proxy.esl.cisco.com:80/

export ftp_proxy=http://proxy.esl.cisco.com:80/

export no_proxy=.cisco.com<http://cisco.com>

export HTTP_PROXY=http://proxy.esl.cisco.com:80/

export HTTPS_PROXY=http://proxy.esl.cisco.com:80/

export FTP_PROXY=http://proxy.esl.cisco.com:80/

Cheers,

Einar

Re: YDK-Py installation made super simple!

baalagar — Wed, 26 Apr 2017 09:15:57 GMT

Thanks Einar , it is installed properly after proxy set that you shared

[root@exr-idt-ucs ~]# pip install ydk-models-cisco-ios-xr

Requirement already satisfied: ydk-models-cisco-ios-xr in /usr/lib/python2.7/site-packages

Requirement already satisfied: ydk-models-ietf>=0.1.1 in /usr/lib/python2.7/site-packages (from ydk-models-cisco-ios-xr)

Requirement already satisfied: enum34==1.1.3 in /usr/lib/python2.7/site-packages (from ydk-models-cisco-ios-xr)

Requirement already satisfied: lxml==3.4.4 in /usr/lib64/python2.7/site-packages (from ydk-models-cisco-ios-xr)

Requirement already satisfied: ydk-models-openconfig>=0.1.2 in /usr/lib/python2.7/site-packages (from ydk-models-cisco-ios-xr)

Requirement already satisfied: ydk>=0.5.2 in /usr/lib/python2.7/site-packages (from ydk-models-cisco-ios-xr)

Requirement already satisfied: ncclient>=0.4.7 in /usr/lib/python2.7/site-packages (from ydk-models-cisco-ios-xr)

Requirement already satisfied: pybind11==2.0.1 in /usr/lib/python2.7/site-packages (from ydk>=0.5.2->ydk-models-cisco-ios-xr)

Requirement already satisfied: setuptools>0.6 in /usr/lib/python2.7/site-packages (from ncclient>=0.4.7->ydk-models-cisco-ios-xr)

Requirement already satisfied: paramiko>=1.15.0 in /usr/lib/python2.7/site-packages (from ncclient>=0.4.7->ydk-models-cisco-ios-xr)

Requirement already satisfied: six in /usr/lib/python2.7/site-packages (from ncclient>=0.4.7->ydk-models-cisco-ios-xr)

Requirement already satisfied: cryptography>=1.1 in /usr/lib64/python2.7/site-packages (from paramiko>=1.15.0->ncclient>=0.4.7->ydk-models-cisco-ios-xr)

Requirement already satisfied: pyasn1>=0.1.7 in /usr/lib/python2.7/site-packages (from paramiko>=1.15.0->ncclient>=0.4.7->ydk-models-cisco-ios-xr)

Requirement already satisfied: idna>=2.0 in /usr/lib/python2.7/site-packages (from cryptography>=1.1->paramiko>=1.15.0->ncclient>=0.4.7->ydk-models-cisco-ios-xr)

Requirement already satisfied: ipaddress in /usr/lib/python2.7/site-packages (from cryptography>=1.1->paramiko>=1.15.0->ncclient>=0.4.7->ydk-models-cisco-ios-xr)

Requirement already satisfied: cffi>=1.4.1 in /usr/lib64/python2.7/site-packages (from cryptography>=1.1->paramiko>=1.15.0->ncclient>=0.4.7->ydk-models-cisco-ios-xr)

Requirement already satisfied: pycparser in /usr/lib/python2.7/site-packages (from cffi>=1.4.1->cryptography>=1.1->paramiko>=1.15.0->ncclient>=0.4.7->ydk-models-cisco-ios-xr)

===========================================================================

>>> from ydk.models.cisco_ios_xr import Cisco_IOS_XR_ip_static_cfg

>>> from ydk.providers import NetconfServiceProvider

>>> from ydk.services import CRUDService

>>> ncc = NetconfServiceProvider(address='172.27.121.52' , username='root', password='lab', port=830)

Traceback (most recent call last):

File "<stdin>", line 1, in <module>

File "/auto/cafy_dev/cafykit/exec/lib/python3.4/site-packages/ydk/providers/netconf_provider.py", line 69, in __init__

self._connect()

File "/auto/cafy_dev/cafykit/exec/lib/python3.4/site-packages/ydk/providers/netconf_provider.py", line 75, in _connect

self.sp_instance.connect(self.session_config)

File "/auto/cafy_dev/cafykit/exec/lib/python3.4/site-packages/ydk/providers/_provider_plugin.py", line 296, in connect

hostkey_verify=False)

File "/auto/cafy_dev/cafykit/exec/lib/python3.4/site-packages/ncclient/manager.py", line 154, in connect

return connect_ssh(*args, **kwds)

File "/auto/cafy_dev/cafykit/exec/lib/python3.4/site-packages/ncclient/manager.py", line 119, in connect_ssh

session.connect(*args, **kwds)

File "/auto/cafy_dev/cafykit/exec/lib/python3.4/site-packages/ncclient/transport/ssh.py", line 383, in connect

raise SSHError("Could not open socket to %s:%s" % (host, port))

ncclient.transport.errors.SSHError: Could not open socket to 172.27.121.52:830

i seen SSH exception , manually i could login

baalagar@exr-idt-ucs.cisco.com%>ssh root@172.27.121.52

Password:

RP/0/RP0/CPU0:ios#

thanks

Bala

Re: YDK-Py installation made super simple!

haydar.oracle.92 — Wed, 26 Apr 2017 10:53:04 GMT

thanx

Re: YDK-Py installation made super simple!

jwatters06 — Sun, 20 Aug 2017 22:10:45 GMT

Hi,

I am a network engineer and would like to experiment with yang and netconf on IOS XR. I have followed the instructions but my install is failing with "Failed building wheel for ydk" Here is some info of my environment and some log messages that might help some one hopefully point me in the right direction which would be great:

Ubuntu (LUbuntu) running in VMWare Fusion on a Mac Book Pro.

lsb_release -a

No LSB modules are available.

Distributor ID: Ubuntu

Description: Ubuntu 16.04.3 LTS

Release: 16.04

Codename: xenial

python -V

Python 2.7.12

pip list

beautifulsoup4 (4.4.1)

cffi (1.9.1)

chardet (2.3.0)

cryptography (1.7.1)

defer (1.0.6)

enum34 (1.1.6)

html5lib (0.999)

idna (2.2)

ipaddress (1.0.18)

lxml (3.5.0)

netmiko (1.2.7)

paramiko (2.1.1)

pip (9.0.1)

psutil (3.4.2)

pyasn1 (0.1.9)

pybind11 (2.1.1)

pycparser (2.17)

pycups (1.9.73)

pycurl (7.43.0)

pygobject (3.20.0)

pysmbc (1.0.15.5)

pysqlite (2.7.0)

python-apt (1.1.0b1)

python-debian (0.1.27)

pyxdg (0.25)

PyYAML (3.12)

scp (0.10.2)

setuptools (36.2.7)

six (1.10.0)

wheel (0.29.0)

# portion of output during install

Building wheels for collected packages: ydk

Running setup.py bdist_wheel for ydk ... error

Failed building wheel for ydk

Running setup.py clean for ydk

Failed to build ydk

Installing collected packages: ydk, ydk-models-ietf, ydk-models-openconfig, ydk-models-cisco-ios-xr

Running setup.py install for ydk ... error

Command "/usr/bin/python -u -c "import setuptools, tokenize;__file__='/tmp/pip-build-TS0UEL/ydk/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-M_zvho-record/install-record.txt --compile" failed with error code 1 in /tmp/pip-build-TS0UEL/ydk/

snippet form --log output from pip install command.

running build_ext

-- The C compiler identification is GNU 5.4.0

-- The CXX compiler identification is GNU 5.4.0

-- Check for working C compiler: /usr/bin/cc

-- Check for working C compiler: /usr/bin/cc -- works

-- Detecting C compiler ABI info

-- Detecting C compiler ABI info - done

-- Detecting C compile features

-- Detecting C compile features - done

-- Check for working CXX compiler: /usr/bin/c++

-- Check for working CXX compiler: /usr/bin/c++ -- works

-- Detecting CXX compiler ABI info

-- Detecting CXX compiler ABI info - done

-- Detecting CXX compile features

-- Detecting CXX compile features - done

python library: /usr/lib/python2.7/config-x86_64-linux-gnu/libpython2.7.so

python include: /usr/include/python2.7

pybind11 include: /usr/local/include/python2.7;/home/jwatters/.local/include/python2.7

CMake Error: The following variables are used in this project, but they are set to NOTFOUND.

Please set them or make sure they are set and tested correctly in the CMake files:

curl_location

linked by target "ydk_" in directory /tmp/pip-build-86gcac/ydk

pcre_location

linked by target "ydk_" in directory /tmp/pip-build-86gcac/ydk

ssh_location

linked by target "ydk_" in directory /tmp/pip-build-86gcac/ydk

ssh_threads_location

linked by target "ydk_" in directory /tmp/pip-build-86gcac/ydk

ydk_location

linked by target "ydk_" in directory /tmp/pip-build-86gcac/ydk

-- Configuring incomplete, errors occurred!

Thank you for any tips you can provide.

Jim

Re: YDK-Py installation made super simple!

abhirame — Mon, 21 Aug 2017 04:09:42 GMT

The error indicates the system dependencies have not been installed. Can you install these first?

https://github.com/CiscoDevNet/ydk-py

Also please make sure you're using a virtualenv on Mac OSX.

Re: YDK-Py installation made super simple!

jwatters06 — Tue, 22 Aug 2017 03:38:03 GMT

Thank you! I did a clean install of LUbuntu 16.04 I apologize I had used an older link and the linux requirements were a little different then they are now for 0.6.0. I am a little confused that i don't see ydk-models-cisco-ios-xr in my pip list:

pip list

DEPRECATION: The default format will switch to columns in the future. You can use --format=(legacy|columns) (or define a format=(legacy|columns) in your pip.conf under the [list] section) to disable this warning.

chardet (2.3.0)

defer (1.0.6)

pip (9.0.1)

psutil (3.4.2)

pybind11 (2.1.1)

pygobject (3.20.0)

pysqlite (2.7.0)

python-apt (1.1.0b1)

python-debian (0.1.27)

pyxdg (0.25)

setuptools (36.2.7)

six (1.10.0)

wheel (0.29.0)

ydk (0.6.0)

ydk-models-ietf (0.1.3)

ydk-models-openconfig (0.1.3)

Will try to test a sample with an ASR 9001 that i have in the lab tomorrow.

Jim

Re: YDK-Py installation made super simple!

balamani — Tue, 22 Aug 2017 12:10:23 GMT

Hi,

I am using vagrant box which has ydk 0.5.4.

If i run following command "vagrant box update", i get below output.

==> ydk-py-ubuntu: Checking for updates to 'ydk-py-ubuntu'

ydk-py-ubuntu: Latest installed version: 0.5.4

ydk-py-ubuntu: Version constraints:

ydk-py-ubuntu: Provider: virtualbox

==> ydk-py-ubuntu: Box 'ydk-py-ubuntu' (v0.5.4) is running the latest version.

Please let me know whether ydk 0.6.0 is available for vagrant box or not. Also let me know if there is any other way to upgrading ydk to latest version.

Thanks in advance.

Regards,

Basavaraj

Re: YDK-Py installation made super simple!

abhirame — Tue, 22 Aug 2017 15:49:31 GMT

I believe, currently, the YDK vagrant box does not support YDK 0.6.0. But it should support it in the future.

Re: YDK-Py installation made super simple!

saalvare — Tue, 22 Aug 2017 18:02:04 GMT

Planning to update the vagrant sandbox by the end of the week. Stay tuned.

Re: YDK-Py installation made super simple!

Jean-Marie NGOK GWEM — Thu, 31 Aug 2017 18:01:10 GMT

Hi Jim,

Culd you please share the outcome of your testing ? I am doing the same testing on IOS-XR platforms and I am facing some issues with NETCONF and YANG.

Thanks

Re: YDK-Py installation made super simple!

saalvare — Thu, 07 Sep 2017 01:40:11 GMT

See Vagrant sandbox updated with latest release (YDK 0.6.0)

Re: YDK-Py installation made super simple!

mjegathe — Fri, 22 Sep 2017 07:30:32 GMT

I have installed all the dependencies mentioned below.

apt-get install libcurl4-openssl-dev libpcre3-dev libssh-dev libxml2-dev libxslt1-dev libtool-bin cmake python3-dev python-dev

My ubuntu version:

root@frettay:/home/ytoolnew/ytool/v# lsb_release -a

No LSB modules are available.

Distributor ID: Ubuntu

Description: Ubuntu 14.04.5 LTS

Release: 14.04

Codename: trusty

When i tried to install ydk from source in virtual environment i am getting cmake error as below.

(ydk) root@frettay:/home/ytoolnew/ytool/v/bin/ydk/ydk-py/core# pip install dist/ydk*.gz

Processing ./dist/ydk-0.6.0.tar.gz

Requirement already satisfied: pybind11>=2.1.1 in ./ydk/lib/python2.7/site-packages (from ydk==0.6.0)

Building wheels for collected packages: ydk

Running setup.py bdist_wheel for ydk ... error

Complete output from command /home/ytoolnew/ytool/v/bin/ydk/ydk-py/core/ydk/bin/python2.7 -u -c "import setuptools, tokenize;__file__='/tmp/pip-OGc57f-build/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" bdist_wheel -d /tmp/tmpP97MKNpip-wheel- --python-tag cp27:

running bdist_wheel

running build

running build_py

creating build

creating build/lib.linux-i686-2.7

creating build/lib.linux-i686-2.7/ydk

copying ydk/exthook.py -> build/lib.linux-i686-2.7/ydk

copying ydk/__init__.py -> build/lib.linux-i686-2.7/ydk

creating build/lib.linux-i686-2.7/ydk/entity_utils

copying ydk/entity_utils/__init__.py -> build/lib.linux-i686-2.7/ydk/entity_utils

creating build/lib.linux-i686-2.7/ydk/models

copying ydk/models/__init__.py -> build/lib.linux-i686-2.7/ydk/models

creating build/lib.linux-i686-2.7/ydk/path

copying ydk/path/__init__.py -> build/lib.linux-i686-2.7/ydk/path

creating build/lib.linux-i686-2.7/ydk/providers

copying ydk/providers/codec_provider.py -> build/lib.linux-i686-2.7/ydk/providers

copying ydk/providers/__init__.py -> build/lib.linux-i686-2.7/ydk/providers

creating build/lib.linux-i686-2.7/ydk/errors

copying ydk/errors/error_handler.py -> build/lib.linux-i686-2.7/ydk/errors

copying ydk/errors/__init__.py -> build/lib.linux-i686-2.7/ydk/errors

creating build/lib.linux-i686-2.7/ydk/types

copying ydk/types/py_types.py -> build/lib.linux-i686-2.7/ydk/types

copying ydk/types/__init__.py -> build/lib.linux-i686-2.7/ydk/types

creating build/lib.linux-i686-2.7/ydk/logging

copying ydk/logging/__init__.py -> build/lib.linux-i686-2.7/ydk/logging

creating build/lib.linux-i686-2.7/ydk/filters

copying ydk/filters/__init__.py -> build/lib.linux-i686-2.7/ydk/filters

creating build/lib.linux-i686-2.7/ydk/services

copying ydk/services/executor_service.py -> build/lib.linux-i686-2.7/ydk/services

copying ydk/services/crud_service.py -> build/lib.linux-i686-2.7/ydk/services

copying ydk/services/netconf_service.py -> build/lib.linux-i686-2.7/ydk/services

copying ydk/services/codec_service.py -> build/lib.linux-i686-2.7/ydk/services

copying ydk/services/__init__.py -> build/lib.linux-i686-2.7/ydk/services

creating build/lib.linux-i686-2.7/ydk/ext

copying ydk/ext/__init__.py -> build/lib.linux-i686-2.7/ydk/ext

running build_ext

-- The C compiler identification is GNU 4.8.4

-- The CXX compiler identification is GNU 4.8.4

-- Check for working C compiler: /usr/bin/cc

-- Check for working C compiler: /usr/bin/cc -- works

-- Detecting C compiler ABI info

-- Detecting C compiler ABI info - done

-- Detecting C compile features

-- Detecting C compile features - done

-- Check for working CXX compiler: /usr/bin/c++

-- Check for working CXX compiler: /usr/bin/c++ -- works

-- Detecting CXX compiler ABI info

-- Detecting CXX compiler ABI info - done

-- Detecting CXX compile features

-- Detecting CXX compile features - done

python library: libpython2.7.so

python include: /usr/local/include/python2.7

pybind11 include: /home/ytoolnew/ytool/v/bin/ydk/ydk-py/core/ydk/include/site/python2.7;/home/ytoolnew/ytool/v/bin/ydk/ydk-py/core/ydk/include/site/python2.7

CMake Error: The following variables are used in this project, but they are set to NOTFOUND.

Please set them or make sure they are set and tested correctly in the CMake files:

ydk_location

linked by target "ydk_" in directory /tmp/pip-OGc57f-build

-- Configuring incomplete, errors occurred!

See also "/tmp/pip-OGc57f-build/build/temp.linux-i686-2.7/CMakeFiles/CMakeOutput.log".

Traceback (most recent call last):

File "<string>", line 1, in <module>

File "/tmp/pip-OGc57f-build/setup.py", line 157, in <module>

zip_safe=False,

File "/usr/local/lib/python2.7/distutils/core.py", line 151, in setup

dist.run_commands()

File "/usr/local/lib/python2.7/distutils/dist.py", line 953, in run_commands

self.run_command(cmd)

File "/usr/local/lib/python2.7/distutils/dist.py", line 972, in run_command

cmd_obj.run()

File "/home/ytoolnew/ytool/v/bin/ydk/ydk-py/core/ydk/lib/python2.7/site-packages/wheel/bdist_wheel.py", line 204, in run

self.run_command('build')

File "/usr/local/lib/python2.7/distutils/cmd.py", line 326, in run_command

self.distribution.run_command(command)

File "/usr/local/lib/python2.7/distutils/dist.py", line 972, in run_command

cmd_obj.run()

File "/usr/local/lib/python2.7/distutils/command/build.py", line 127, in run

self.run_command(cmd_name)

File "/usr/local/lib/python2.7/distutils/cmd.py", line 326, in run_command

self.distribution.run_command(command)

File "/usr/local/lib/python2.7/distutils/dist.py", line 972, in run_command

cmd_obj.run()

File "/tmp/pip-OGc57f-build/setup.py", line 69, in run

self.build_extension(ext)

File "/tmp/pip-OGc57f-build/setup.py", line 93, in build_extension

subprocess.check_call(['cmake', ext.sourcedir] + cmake_args, cwd=self.build_temp)

File "/usr/local/lib/python2.7/subprocess.py", line 540, in check_call

raise CalledProcessError(retcode, cmd)

subprocess.CalledProcessError: Command '['cmake', '/tmp/pip-OGc57f-build', '-DCMAKE_LIBRARY_OUTPUT_DIRECTORY=/tmp/pip-OGc57f-build/build/lib.linux-i686-2.7', '-DPYBIND11_INCLUDE=/home/ytoolnew/ytool/v/bin/ydk/ydk-py/core/ydk/include/site/python2.7;/home/ytoolnew/ytool/v/bin/ydk/ydk-py/core/ydk/include/site/python2.7', '-DPYTHON_LIBRARY=libpython2.7.so', '-DPYTHON_INCLUDE=/usr/local/include/python2.7', '-DCMAKE_BUILD_TYPE=Release']' returned non-zero exit status 1

----------------------------------------

Failed building wheel for ydk

Running setup.py clean for ydk

Failed to build ydk

Installing collected packages: ydk

Running setup.py install for ydk ... error

Complete output from command /home/ytoolnew/ytool/v/bin/ydk/ydk-py/core/ydk/bin/python2.7 -u -c "import setuptools, tokenize;__file__='/tmp/pip-OGc57f-build/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-QWoWnc-record/install-record.txt --single-version-externally-managed --compile --install-headers /home/ytoolnew/ytool/v/bin/ydk/ydk-py/core/ydk/include/site/python2.7/ydk:

running install

running build

running build_py

creating build

creating build/lib.linux-i686-2.7

creating build/lib.linux-i686-2.7/ydk

copying ydk/exthook.py -> build/lib.linux-i686-2.7/ydk

copying ydk/__init__.py -> build/lib.linux-i686-2.7/ydk

creating build/lib.linux-i686-2.7/ydk/entity_utils

copying ydk/entity_utils/__init__.py -> build/lib.linux-i686-2.7/ydk/entity_utils

creating build/lib.linux-i686-2.7/ydk/models

copying ydk/models/__init__.py -> build/lib.linux-i686-2.7/ydk/models

creating build/lib.linux-i686-2.7/ydk/path

copying ydk/path/__init__.py -> build/lib.linux-i686-2.7/ydk/path

creating build/lib.linux-i686-2.7/ydk/providers

copying ydk/providers/codec_provider.py -> build/lib.linux-i686-2.7/ydk/providers

copying ydk/providers/__init__.py -> build/lib.linux-i686-2.7/ydk/providers

creating build/lib.linux-i686-2.7/ydk/errors

copying ydk/errors/error_handler.py -> build/lib.linux-i686-2.7/ydk/errors

copying ydk/errors/__init__.py -> build/lib.linux-i686-2.7/ydk/errors

creating build/lib.linux-i686-2.7/ydk/types

copying ydk/types/py_types.py -> build/lib.linux-i686-2.7/ydk/types

copying ydk/types/__init__.py -> build/lib.linux-i686-2.7/ydk/types

creating build/lib.linux-i686-2.7/ydk/logging

copying ydk/logging/__init__.py -> build/lib.linux-i686-2.7/ydk/logging

creating build/lib.linux-i686-2.7/ydk/filters

copying ydk/filters/__init__.py -> build/lib.linux-i686-2.7/ydk/filters

creating build/lib.linux-i686-2.7/ydk/services

copying ydk/services/executor_service.py -> build/lib.linux-i686-2.7/ydk/services

copying ydk/services/crud_service.py -> build/lib.linux-i686-2.7/ydk/services

copying ydk/services/netconf_service.py -> build/lib.linux-i686-2.7/ydk/services

copying ydk/services/codec_service.py -> build/lib.linux-i686-2.7/ydk/services

copying ydk/services/__init__.py -> build/lib.linux-i686-2.7/ydk/services

creating build/lib.linux-i686-2.7/ydk/ext

copying ydk/ext/__init__.py -> build/lib.linux-i686-2.7/ydk/ext

running build_ext

-- The C compiler identification is GNU 4.8.4

-- The CXX compiler identification is GNU 4.8.4

-- Check for working C compiler: /usr/bin/cc

-- Check for working C compiler: /usr/bin/cc -- works

-- Detecting C compiler ABI info

-- Detecting C compiler ABI info - done

-- Detecting C compile features

-- Detecting C compile features - done

-- Check for working CXX compiler: /usr/bin/c++

-- Check for working CXX compiler: /usr/bin/c++ -- works

-- Detecting CXX compiler ABI info

-- Detecting CXX compiler ABI info - done

-- Detecting CXX compile features

-- Detecting CXX compile features - done

python library: libpython2.7.so

python include: /usr/local/include/python2.7

pybind11 include: /home/ytoolnew/ytool/v/bin/ydk/ydk-py/core/ydk/include/site/python2.7;/home/ytoolnew/ytool/v/bin/ydk/ydk-py/core/ydk/include/site/python2.7

CMake Error: The following variables are used in this project, but they are set to NOTFOUND.

Please set them or make sure they are set and tested correctly in the CMake files:

ydk_location

linked by target "ydk_" in directory /tmp/pip-OGc57f-build

-- Configuring incomplete, errors occurred!

See also "/tmp/pip-OGc57f-build/build/temp.linux-i686-2.7/CMakeFiles/CMakeOutput.log".

Traceback (most recent call last):

File "<string>", line 1, in <module>

File "/tmp/pip-OGc57f-build/setup.py", line 157, in <module>

zip_safe=False,

File "/usr/local/lib/python2.7/distutils/core.py", line 151, in setup

dist.run_commands()

File "/usr/local/lib/python2.7/distutils/dist.py", line 953, in run_commands

self.run_command(cmd)

File "/usr/local/lib/python2.7/distutils/dist.py", line 972, in run_command

cmd_obj.run()

File "/home/ytoolnew/ytool/v/bin/ydk/ydk-py/core/ydk/lib/python2.7/site-packages/setuptools/command/install.py", line 61, in run

return orig.install.run(self)

File "/usr/local/lib/python2.7/distutils/command/install.py", line 563, in run

self.run_command('build')

File "/usr/local/lib/python2.7/distutils/cmd.py", line 326, in run_command

self.distribution.run_command(command)

File "/usr/local/lib/python2.7/distutils/dist.py", line 972, in run_command

cmd_obj.run()

File "/usr/local/lib/python2.7/distutils/command/build.py", line 127, in run

self.run_command(cmd_name)

File "/usr/local/lib/python2.7/distutils/cmd.py", line 326, in run_command

self.distribution.run_command(command)

File "/usr/local/lib/python2.7/distutils/dist.py", line 972, in run_command

cmd_obj.run()

File "/tmp/pip-OGc57f-build/setup.py", line 69, in run

self.build_extension(ext)

File "/tmp/pip-OGc57f-build/setup.py", line 93, in build_extension

subprocess.check_call(['cmake', ext.sourcedir] + cmake_args, cwd=self.build_temp)

File "/usr/local/lib/python2.7/subprocess.py", line 540, in check_call

raise CalledProcessError(retcode, cmd)

----------------------------------------

Command "/home/ytoolnew/ytool/v/bin/ydk/ydk-py/core/ydk/bin/python2.7 -u -c "import setuptools, tokenize;__file__='/tmp/pip-OGc57f-build/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-QWoWnc-record/install-record.txt --single-version-externally-managed --compile --install-headers /home/ytoolnew/ytool/v/bin/ydk/ydk-py/core/ydk/include/site/python2.7/ydk" failed with error code 1 in /tmp/pip-OGc57f

Note: Even tried with quick install of ydk and facing the same issue.

Re: YDK-Py installation made super simple!

abhirame — Fri, 22 Sep 2017 17:33:49 GMT

Based on the error, it looks like libydk is missing.

As specified in the system requirements, can you please install libydk (https://github.com/CiscoDevNet/ydk-py#linux)?

$ wget https://devhub.cisco.com/artifactory/debian-ydk/0.6.0/libydk_0.6.0-1_amd64.deb

$ sudo gdebi libydk_0.6.0-1_amd64.deb