topic Re: Coredump check yang model info reqd in Tools

Coredump check yang model info reqd

jayachandran.subramanian1 — Fri, 19 May 2017 04:18:03 GMT

Hi,

I tried yang model cisco-ios-xr 6.2.1 version for finding coredump check below cli command

P/0/RP0/CPU0:Router#dir harddisk:

Mon May 8 00:10:28.134 EDT

Directory of harddisk:

20 drwxr-xr-x 2 4096 Jul 1 2016 dumper

55 -rw-r--r-- 1 117127 Apr 19 18:33 cleaf1_show_tech_arp.c2.tgz

57 -rw-r--r-- 1 83445 Apr 19 18:34 cleaf1_show_tech_spp.c2.tgz

52 -rwxr--r-- 1 679137 Apr 19 19:15 netio_trace.c1

12 drwxr-xr-x 2 4096 Jul 1 2016 tftpboot

107 -rwx------ 1 61169 Mar 1 13:17 dedsdf1003jl1-sh-run-03012017

60 -rw-r--r-- 1 68443 Apr 19 18:38 cleaf1_show_tech_spio.c2.tgz

So could you please let me know the yang model for finding dir harddisk:

Thanks

Jay

Re: Coredump check yang model info reqd

saalvare — Tue, 23 May 2017 04:11:43 GMT

Jay,

An RPC model is required for that action. It is currently not available on released software. Let me look at the roadmap and get back to you. Thanks.

Re: Coredump check yang model info reqd

saalvare — Wed, 24 May 2017 06:41:09 GMT

Jay,

The target date for the release of file system RPCs hasn't been confirmed yet. Currently, you'd need to retrieve the fails in the file system vis CLI. We're working on closing these gaps as soon as possible, but we just don't have a firm date for this one in particular. In a month or two, we should have better visibility. HTH.

Re: Coredump check yang model info reqd

nithin.bk8 — Wed, 24 May 2017 09:46:15 GMT

Jay,

I think you can try these yang modules for the above commands.

http://ydk.cisco.com/py/docs/gen_doc_6697ca93cba56c4a7b49a7e5c1f13a1539440b9d.html

http://ydk.cisco.com/py/docs/gen_doc_392e32629c2098812ffdf4c1246e8367d81f2ffd.html

Thank you,

Nithin

Re: Coredump check yang model info reqd

jayachandran.subramanian1 — Wed, 24 May 2017 11:18:41 GMT

Hi Santiago,

Please ignore my previous reply about few cli related yang model.

I am trying to find the cli output for yangmodel

RP/0/RP0/CPU0:dedsdf1011jl1#sh bgp ipv4 unicast advertised neighbor 10.20.20.26

Wed May 24 07:11:19.574 EDT

10.20.20.70/32 is advertised to 10.20.20.26

Path info:

neighbor: Local neighbor router id: 10.20.20.70

valid redistributed best

Received Path ID 0, Local Path ID 0, version 6

Attributes after inbound policy was applied:

next hop: 0.0.0.0

MET ORG AS COMM

origin: incomplete metric: 0

aspath:

community: 13979:3111 62301:21

Attributes after outbound policy was applied:

next hop: 10.20.20.70

MET ORG AS COMM

origin: incomplete metric: 0

aspath:

community: 13979:3111 62301:21

Please let us know which yang model needs to refer this above cli putput . We are getting in XML rpcreply with community as 916130845 instead of 13979:3111

Please let me know your inputs

Thanks

Jay

Re: Coredump check yang model info reqd

einarnn — Wed, 24 May 2017 11:37:57 GMT

916130845 is the equivalent of 13979:3101 if you treat it as a 64-bit number. The upper 32-bits are 13979, and the lower 32-bits are 3101.

What path are you using to retrieve the data you get?

Re: Coredump check yang model info reqd

jayachandran.subramanian1 — Wed, 24 May 2017 13:42:57 GMT

Hi Einar,

Thank you your prompt response , its very helpful to resolve the issue

Also i would like to show the RPC which i am using to get route-policy community output .

def read(host, user, password):

try:

with manager.connect(host=host, username=user, password=password, look_for_keys=False,timeout=150) as m:

bgp_filter = '''

<instance-name>default</instance-name>

<instance-active>

<default-vrf>

<afs>

<af>

<af-name>ipv4-unicast</af-name>

<advertised-path-xr>

<advertised-path/>

</advertised-path-xr>

</af>

</afs>

</default-vrf>

</instance-active>

</instance>

</instances>

</bgp>

'''

cisco_bgp = m.get(('subtree', bgp_filter))

print (cisco_bgp)

with open("/tmp/difficultipv4ncc167new1.xml", "w+") as file_obj:

file_obj.write(str(cisco_bgp))

except Exception as exe:

print 'Exception caught in read()',exe

With these RPC , we are getting XML RPC reply . But when we are grepping community set its showing as 916130845 instead of 13979:3101

So how we can get the community output as 13979:3101 .

Here we are trying show bgp ipv4 unicast advertised neighbor 10.80.65.60 and out put will provide the nexthop and community value.

Thanks

Jay

Re: Coredump check yang model info reqd

einarnn — Wed, 24 May 2017 13:59:01 GMT

Jay,

First, my explanation was slightly wrong. The content is a single 32-bit number with two 16-bit values in it. The community list is here in the YANG tree (and maybe in other places):

module: Cisco-IOS-XR-ipv4-bgp-oper

+--ro bgp

+--ro instances

+--ro instance*

+--ro instance-active

+--ro default-vrf

+--ro afs

+--ro af*

+--ro advertised-path-xr

+--ro advertised-path*

+--ro attributes-after-policy-in

+--ro common-attributes

+--ro community*

+--ro entry? uint32

As you can see, the type is a uint32, which means that a number, as you received, is the correct wire representation. A display like "13979:3101” is a presentation layer issue, and must be implemented by your code. For example:

14:54 $ python

Python 2.7.13 (default, Dec 18 2016, 07:03:39)

on darwin

Type "help", "copyright", "credits" or "license" for more information.

>>> community = 916130845

>>> c_upper = community & 0xffff0000

>>> c_lower = community & 0x0000ffff

>>> print('%d:%d' % (c_upper >> 16, c_lower))

13979:3101

>>>

Cheers,

Einar

Re: Coredump check yang model info reqd

jayachandran.subramanian1 — Thu, 25 May 2017 07:11:33 GMT

Thank you Einar for the resolution !!!