topic Re: redirect nexthop route-target in policy map in Tools

redirect nexthop route-target in policy map

haoywang — Thu, 16 Feb 2017 09:26:34 GMT

Hi experts

I have a policy map in our device and use the redirect nexthop route-target command.

I've tried to get the policy map configuration with YDK and I can only get the class-name and class-type with no additional policymaprule.

Can I get the full policy map config with the current version YDK?

The config on device is:

policy-map type pbr s100

class type traffic s1

redirect nexthop route-target 100:1

And the config I get with YDK is:

<policy-maps>

<policy-map>

<policy-map-rule>

<class-name>s1</class-name>

<class-type>traffic</class-type>

</policy-map-rule>

</policy-map>

</policy-maps>

Re: redirect nexthop route-target in policy map

saalvare — Thu, 16 Feb 2017 18:14:43 GMT

Redirection seems to be missing from the model. Let me investigate.

Re: redirect nexthop route-target in policy map

haoywang — Fri, 17 Feb 2017 01:26:34 GMT

Thanks, let me know if you need any additional infomation

Re: redirect nexthop route-target in policy map

saalvare — Fri, 17 Feb 2017 23:06:00 GMT

Support for redirection is missing in model Cisco-IOS-XR-infra-policymgr-cfg. YDK just reflects the current state of the model. I've reported the XR defect (CSCvd21030) so it can be address. Once the model is fixed, YDK will reflect the updated model.

Re: redirect nexthop route-target in policy map

haoywang — Sat, 18 Feb 2017 09:37:17 GMT

Thanks for your help.

And one more question, once the model is fixed, do I need to upgrade the YDK to a new version or I can still use the current version?

Re: redirect nexthop route-target in policy map

saalvare — Sun, 19 Feb 2017 10:14:15 GMT

Since the APIs are autogenerated from the models, you'd need to upgrade YDK to a version that makes use of the fixed model revision.