topic API endpoint not working v1.47 & v1.48.0 in Network Platform API

API endpoint not working v1.47 & v1.48.0

252_Masked_Nett — Thu, 01 Aug 2024 12:52:41 GMT

Hello Folks,

Attempting to update a Z3's single LANs DHCP, DNS custom name server IP addresses using 'baseUrl/networks/:networkId/appliance/singleLan'. When I enter the updated IPs in the body of the PUT request, the successful response shows the IP addresses went unchanged. Can anyone test this and verify?

Re: API endpoint not working v1.47 & v1.48.0

Philip D'Ath — Thu, 01 Aug 2024 22:14:51 GMT

Is it already configured with a VLAN?

Re: API endpoint not working v1.47 & v1.48.0

John-on-API — Fri, 02 Aug 2024 15:58:18 GMT

Hi @252_Masked_Nett are you sure updates are allowed to that path? Please check the documentation and confirm. I suspect it's a read-only operation.

Re: API endpoint not working v1.47 & v1.48.0

riduque — Fri, 02 Aug 2024 18:39:34 GMT

Are you using this API Endpoint? https://developer.cisco.com/meraki/api-v1/update-network-appliance-single-lan/

Are you getting any specific errors?

Re: API endpoint not working v1.47 & v1.48.0

252_Masked_Nett — Mon, 05 Aug 2024 16:31:02 GMT

Teleworker Gateway > Addressing/VLANs > Routing > Single LAN

Re: API endpoint not working v1.47 & v1.48.0

252_Masked_Nett — Mon, 05 Aug 2024 16:41:16 GMT

There's a PUT method for single lan settings, but I just recognized something, there isn't a 'name:value' option for any custom name servers in the schema. So that isn't supported right now.

Re: API endpoint not working v1.47 & v1.48.0

252_Masked_Nett — Mon, 05 Aug 2024 16:43:55 GMT

No specific errors. The custom name server field wouldn't update. BUT, I just saw that it isn't supported right now in the schema. There's not 'name:value' pair in the schema example supporting this right now.

Re: API endpoint not working v1.47 & v1.48.0

252_Masked_Nett — Mon, 05 Aug 2024 16:45:46 GMT

Thank you all for your help. Understanding Postman and Meraki API is still a ongoing learning journey me!

Re: API endpoint not working v1.47 & v1.48.0

riduque — Mon, 05 Aug 2024 16:52:04 GMT

What if you use this API Endpoint to update the VLAN information? https://developer.cisco.com/meraki/api-v1/update-network-appliance-vlan/