https://community.cisco.com/t5/network-platform-api/managing-network-with-mx64w/m-p/5443977#M6838 <P>While v0 was flexible in this regard, this is a known coverage gap in the v1 API. The current endpoints are MR-specific.</P><P>Given it will be sunset eventually, I can't recommend building integrations off of v0, but you may find success there, until v1 supports MX wireless configuration.</P> Wed, 14 Oct 2020 15:42:28 GMT jonhar 2020-10-14T15:42:28Z https://community.cisco.com/t5/network-platform-api/managing-network-with-mx64w/m-p/5443976#M6837 <P>I'm curious if it is possible to manage the wireless settings of an MX64W with v1 of the API. Trying to use /wireless/ssids doesn't seem to modify the settings but does return successful and does show when I get the list of SSIDs.</P> Tue, 13 Oct 2020 01:54:26 GMT https://community.cisco.com/t5/network-platform-api/managing-network-with-mx64w/m-p/5443976#M6837 TimKud 2020-10-13T01:54:26Z https://community.cisco.com/t5/network-platform-api/managing-network-with-mx64w/m-p/5443977#M6838 <P>While v0 was flexible in this regard, this is a known coverage gap in the v1 API. The current endpoints are MR-specific.</P><P>Given it will be sunset eventually, I can't recommend building integrations off of v0, but you may find success there, until v1 supports MX wireless configuration.</P> Wed, 14 Oct 2020 15:42:28 GMT https://community.cisco.com/t5/network-platform-api/managing-network-with-mx64w/m-p/5443977#M6838 jonhar 2020-10-14T15:42:28Z https://community.cisco.com/t5/network-platform-api/managing-network-with-mx64w/m-p/5443978#M6839 <P>Thanks, Jon. I figured that was it because I could <EM>swear</EM> I was able to mess with them in v0. We'll probably implement v0 temporarily if we end up needing it for our automation, until v1 provides support for it.</P> Wed, 14 Oct 2020 17:16:14 GMT https://community.cisco.com/t5/network-platform-api/managing-network-with-mx64w/m-p/5443978#M6839 TimKud 2020-10-14T17:16:14Z