topic About Plug and Play using C2960CG in Network Platform API

About Plug and Play using C2960CG

Keisuke.I — Mon, 27 May 2019 01:55:54 GMT

Hello,

I can not do PnP, The following message is displayed.

Device disconnected probably due to incorrect certificate or TLS version

The following is the IOS and model number used.

IOS : c2960c405ex-universalk9-mz.152-2.E8.bin

Model number : WS-C2960CG-8TC-L

Is PnP possible using C2960CG?

Regards,

Keisuke

Re: About Plug and Play using C2960CG

Leo Laohoo — Mon, 27 May 2019 07:52:31 GMT

2960CG do not support PnP.

Re: About Plug and Play using C2960CG

Keisuke.I — Mon, 27 May 2019 08:11:25 GMT

Hello Leo,

Thank you for the information.

The following site states that PnP can be done, but is it old information?

https://www.cisco.com/c/ja_jp/support/cloud-systems-management/dna-center/products-device-support-tables-list.html

Regards,

Keisuke

Re: About Plug and Play using C2960CG

Leo Laohoo — Mon, 27 May 2019 09:17:38 GMT

I believe that is talking about the SmartInstall.
This feature has been permanently disabled if the appliance is running an IOS that was released after June 2018.

Re: About Plug and Play using C2960CG

Keisuke.I — Wed, 05 Jun 2019 05:36:15 GMT

You were right.

The list on the site turned out to be wrong.

Regards