topic Re: OpenDNS IP in network adapter is not working in Windows 10 in OpenDNS

OpenDNS IP in network adapter is not working in Windows 10

ineuw — Wed, 05 Sep 2018 19:10:20 GMT

My modem/router's DNS addresses are controlled by the ISP and cannot override them. I prefer using OpenDNS for numerous reasons and placing the OpenDNS IP numbers in the appropriate fields of the on-board network adapter Properties, doesn't work. The adapter is an on-board Intel(R) Ethernet Connection (7) I219-V #2.

I also use Linux Mint 19 on the same desktop and the same modem/router and OpenDNS is active through the Linux Network Manager as indicated at https://www.opendns.com/welcome/. How can I resolve this issue?

Re: OpenDNS IP in network adapter is not working in Windows 10

rotblitz — Wed, 05 Sep 2018 19:39:42 GMT

In case you have dual-stack (IPv4 and IPv6) connectivity, configure addresses from the following list in the IPv6 properties of the active network connection:
::ffff:d043:dede ::ffff:d043:dcdc ::ffff:d043:dedc ::ffff:d043:dcde

If it is not IPv6, copy & paste the complete plain text output of the following diagnostic commands to here:

nslookup -type=txt debug.opendns.com. 208.67.220.220
nslookup -type=txt which.opendns.com.
nslookup whoami.akamai.net.
netsh interface ipv4 show config   (Windows only)
netsh interface ipv6 show dns      (Windows only)

Re: OpenDNS IP in network adapter is not working in Windows 10

ineuw — Wed, 05 Sep 2018 22:29:45 GMT

Much thanks for your reply. I do not use ipv6 at all. Here is the requested info.

Microsoft Windows [Version 10.0.17134.191]
(c) 2018 Microsoft Corporation. All rights reserved.

C:\Windows\system32>nslookup -type=txt debug.opendns.com. 208.67.220.220
Server: resolver2.opendns.com
Address: 208.67.220.220

Non-authoritative answer:
debug.opendns.com       text =

        "server m37.nyc"
debug.opendns.com       text =

        "flags 20 0 70 180000000000000000007950800000000000000"
debug.opendns.com       text =

        "originid 0"
debug.opendns.com       text =

        "actype 0"
debug.opendns.com       text =

        "source 66.36.141.245:60153"

C:\Windows\system32>nslookup -type=txt which.opendns.com
Server: dsldevice.lan
Address: fe80::e2b9:e5ff:fe22:5ba

Non-authoritative answer:
which.opendns.com       text =

        "I am not an OpenDNS resolver."

C:\Windows\system32>netsh interface ipv4 show config

Configuration for interface "Ethernet 2"
    DHCP enabled:                         Yes
    IP Address:                           192.168.1.84
    Subnet Prefix:                        192.168.1.0/24 (mask 255.255.255.0)
    Default Gateway:                      192.168.1.254
    Gateway Metric:                       0
    InterfaceMetric:                      35
    Statically Configured DNS Servers:    208.67.222.222
                                          208.67.220.220
    Register with which suffix:           Both primary and connection-specific
    WINS servers configured through DHCP: None

Configuration for interface "Loopback Pseudo-Interface 1"
    DHCP enabled:                         No
    IP Address:                           127.0.0.1
    Subnet Prefix:                        127.0.0.0/8 (mask 255.0.0.0)
    InterfaceMetric:                      75
    Statically Configured DNS Servers:    None
    Register with which suffix:           Primary only
    Statically Configured WINS Servers:   None

C:\Windows\system32>netsh interface ipv6 show dns

Configuration for interface "Ethernet 2"
    DNS servers configured through DHCP: fe80::e2b9:e5ff:fe22:5ba%6
    Register with which suffix:           Both primary and connection-specific

Configuration for interface "Loopback Pseudo-Interface 1"
    Statically Configured DNS Servers:    fec0:0:0:ffff::1%1
                                          fec0:0:0:ffff::2%1
                                          fec0:0:0:ffff::3%1
    Register with which suffix:           Primary only

Re: OpenDNS IP in network adapter is not working in Windows 10

ineuw — Wed, 05 Sep 2018 23:54:29 GMT

I am using Avast the free version, and I don't think that it's hijacking the DNS.

C:\Windows\system32>ipconfig /all

Windows IP Configuration

   Host Name . . . . . . . . . . . . : WIN10P64B
   Primary Dns Suffix . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : 208.67.222.222
                                       208.67.220.220

Ethernet adapter Ethernet 2:

   Connection-specific DNS Suffix . : lan
   Description . . . . . . . . . . . : Intel(R) Ethernet Connection (7) I219-V #2
   Physical Address. . . . . . . . . : 70-85-C2-7B-78-7D
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::846d:4bac:9606:6bd%6(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.1.84(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : September 5, 2018 18:24:03
   Lease Expires . . . . . . . . . . : September 6, 2018 18:24:03
   Default Gateway . . . . . . . . . : 192.168.1.254
   DHCP Server . . . . . . . . . . . : 192.168.1.254
   DHCPv6 IAID . . . . . . . . . . . : 712017346
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-22-BB-B2-78-E0-D5-5E-89-D8-13
   DNS Servers . . . . . . . . . . . : fe80::e2b9:e5ff:fe22:5ba%6
                                       208.67.222.222
                                       208.67.220.220
   NetBIOS over Tcpip. . . . . . . . : Enabled

Re: OpenDNS IP in network adapter is not working in Windows 10

rotblitz — Thu, 06 Sep 2018 17:25:44 GMT

You are clearly not using OpenDNS, but this link-local IPv6 address of your router:

Server: dsldevice.lan
Address: fe80::e2b9:e5ff:fe22:5ba

As you don't have IPv6 connectivity, you disable IPv6 in the active network adapter on the computer, i.e. uncheck the checkbox for IPv6.

A second different problem is that you didn't register your public IPv4 address 66.36.141.245 at https://dashboard.opendns.com/settings/ at least at the time when you executed the commands.
Don't forget to run an Updater to keep your IP address information updated at OpenDNS.

Regarding Avast hijacking your DNS traffic, I cannot comment, because you forgot to post the command output of 'nslookup whoami.akamai.net.'.

Re: OpenDNS IP in network adapter is not working in Windows 10

ineuw — Thu, 06 Sep 2018 18:32:06 GMT

Thanks for all your help and apologize omitting the 'nslookup whoami.akamai.net' report (below), by which I assume that nothing is hijacked. Corrected everything you pointed out, updated my account and installed the updater as well, and now everything is working fine with Open DNS. Thanks again

C:\Windows\system32>nslookup whoami.akamai.net
Server: resolver1.opendns.com
Address: 208.67.222.222

Name: whoami.akamai.net
Address: 2620:0:cc9::71

Re: OpenDNS IP in network adapter is not working in Windows 10

rotblitz — Fri, 07 Sep 2018 13:57:07 GMT

Good to hear!

And no, Avast does not redirect your DNS traffic. This 2620:0:cc9::71 is an OpenDNS IPv6 address.

nslookup 2620:0:cc9::71
Server:  local
Address:  10.165.123.54

Name:    m49.nyc.opendns.com
Address:  2620:0:cc9::71