topic Re: Using OpenDNS ? No in OpenDNS

Using OpenDNS ? No

tamas.pocs55 — Sat, 29 Apr 2017 16:22:50 GMT

Hey
I have some trouble with configurating the DNS on my router.
I did all the same as in the tutorial and I think nothing works for me.
I will send you a picture of my confugurations. The test always say that I'm not using OpenDNS yet.
What can be the problem ?
Thanks for Your help.

Re: Using OpenDNS ? No

rle78675 — Sun, 30 Apr 2017 09:57:03 GMT

uncheck or disable dhcp relay. Did you reset your modem? do a hard reset that's usually done by pressing a button at your modem/router for a period of time, then after that open command prompt "cmd" then type "ipconfig /release" then type "ipconfig /renew" then "ipconfig /flushdns" don't add the "

I hope you get it.

Re: Using OpenDNS ? No

tamas.pocs55 — Sun, 30 Apr 2017 12:46:33 GMT

Okay I understood. If i hard reset my modem, isn't it going to loose all the settings ? I mean i will have to reconfigure the rooter, won't I ?

Re: Using OpenDNS ? No

rotblitz — Mon, 01 May 2017 13:09:23 GMT

Don't hard reset your router for now. It may not be due to your router.

I see that you configured OpenDNS on the router and on the computer. Why this? Configuring on the router should be sufficient.

Copy & paste the complete plain text outputs of the following diagnostic commands to here:

nslookup -type=txt debug.opendns.com. 208.67.220.220
nslookup -type=txt which.opendns.com.
nslookup whoami.akamai.net.

Re: Using OpenDNS ? No

tamas.pocs55 — Mon, 15 May 2017 19:49:13 GMT

I don't know what is happening. Once it says I use OpenDNS and all is functioning, but once it says I DO NOT use OpenDNS and nothing works... It switches from a minute to another.
I tried to copy & pase lines above.

Maybe there is something wrong with the IP configurations ?

Re: Using OpenDNS ? No

rotblitz — Mon, 15 May 2017 21:27:10 GMT

Who can tell without seeing the command outputs?

In addition I would need to see the output of:

netsh interface ipv4 show config   (for Windows)
ifconfig -all                      (for Linux and OS X)

Re: Using OpenDNS ? No

semillacuern — Fri, 30 Oct 2020 17:42:15 GMT

I have same problem. My command outputs is there: please help @rotblitz

nslookup -type=txt debug.opendns.com. 208.67.220.220

Servidor: resolver2.opendns.com

Address: 208.67.220.220

Respuesta no autoritativa:

debug.opendns.com text =

"server m75.lax"

debug.opendns.com text =

"originid 500265662"

debug.opendns.com text =

"actype 2"

debug.opendns.com text =

"bundle 13010812"

debug.opendns.com text =

"source 189.189.44.31:63514"

nslookup -type=txt which.opendns.com.

Servidor: 2806-1040-ffff-0003-0000-0000-0000-000e.ipv6.infinitum.net.mx

Address: 2806:1040:ffff:3::e

Respuesta no autoritativa:

which.opendns.com text =

"I am not an OpenDNS resolver."

nslookup whoami.akamai.net.

Servidor: 2806-1040-ffff-0003-0000-0000-0000-000e.ipv6.infinitum.net.mx

Address: 2806:1040:ffff:3::e

Respuesta no autoritativa:

Nombre: whoami.akamai.net

Address: 187.141.30.235

thanks

Re: Using OpenDNS ? No

rotblitz — Fri, 30 Oct 2020 21:35:02 GMT

You’re using your ISP’s DNSv6 service instead of OpenDNS. Configure IPv6 with ::ffff:d043:dedc and ::ffff:d043:dcde