求解：瘦ap加入控制器时，ap端报错，提示国家不匹配

[CanZhou293239]

日志如下：
*Dec 7 16:42:31.451: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Dec 7 16:42:31.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.20.10 peer_port: 5246
*Dec 7 16:42:31.435: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 192.168.20.10 peer_port: 5246
*Dec 7 16:42:31.435: %CAPWAP-5-SENDJOIN: sending Join Request to 192.168.20.10
*Dec 7 16:42:31.435: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
*Dec 7 16:42:31.439: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
*Dec 7 16:42:31.439: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Dec 7 16:42:31.439: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap packet from 192.168.20.10
., 1) 7 16:42:49.599: %CAPWAP-3-ERRORLOG: Retransmission count for packet exceeded max(UNKNOWN_MESSAGE_TYPE (5)
请问如何更改ap的国家

[HaifengLi]

补充一点  如果需要添加country code的话 config countries-list add也是不错的选择

(wireless-vwlc-2) >config countries-list ?
               
add            Add countries to the country list.
remove         Remove countries from the country list.
set            Enter the countries of operation.

[Walter.wu]

https://www.cisco.com/c/dam/assets/prod/wireless/wireless-compliance-tool/index.html

上面链接是思科无线兼容性查询工具,确认好无线AP型号的PID,在你的无线控制上，web界面里面，把对应的国别代码加入进去。

config country后面跟你查询的国别