NCS-5000 のソフトウェアオペレーションモードは下記の方法で変更できます。
また、"show sdac system-mode" コマンドで動作モードを確認できます。
・スタンドアロンモードへの変更
RP/0/RP0/CPU0:Sat1000#set sdac system-mode standalone
Thu Jul 18 08:43:14.235 UTC
WARNING: In order to enact this change, all existing
configuration must be removed using commit replace and the
system must be rebooted. Individual process restarts may
cause unexpected behaviour until the reboot occurs.
Do you wish to continue? [confirm (y/n)]
y
Successfully set desired system mode to standalone mode.
RP/0/RP0/CPU0:Sat1000#show sdac system-mode
Thu Jul 18 08:43:45.328 UTC
Current system mode: Standalone mode
RP/0/RP0/CPU0:ios#
・サテライトモードへの変更
RP/0/RP0/CPU0:ios#set sdac system-mode satellite
Thu Jul 18 08:43:54.803 UTC
WARNING: In order to enact this change, all existing
configuration must be removed using commit replace and the
system must be rebooted. Individual process restarts may
cause unexpected behaviour until the reboot occurs.
Do you wish to continue? [confirm (y/n)]
y
Successfully set desired system mode to satellite mode.
RP/0/RP0/CPU0:ios#show sdac system-mode
Thu Jul 18 08:44:15.963 UTC
Current system mode: Satellite mode
RP/0/RP0/CPU0:ios#
<参考URL>System Setup and Software Installation Guide for Cisco NCS 5000 Series Routers, IOS XR Release 6.0.x
