キャンセル
次の結果を表示 
次の代わりに検索 
もしかして: 
cancel
6322
閲覧回数
5
いいね!
3
コメント
Keita Shimoda
Cisco Employee
Cisco Employee

SCE にて show コマンドで長い結果を表示した際、デフォルトでは途中で --More-- と表示されて表示が一旦止まります。

このとき "no more" コマンドを実行することで --More-- は表示されず、全ての表示を一度に行うことができます。

(※ただし、enable mode に入る際、Privilege level 10 か 15 の場合のみ可能です。)

元の --More-- 表示に戻すためには、一度ログアウトする必要があります。

例)

SCE8000#>show version

System version: Version 3.8.5 Build 990

Build time: Dec  1 2012, 12:47:22 (Change-list 716019)

Software version is: Version 3.8.5 Build 990

Cryptography class: K9

Hardware information is:

---------------------

Firmware

---------------------

kernel      : [kernel] 2.4.0/3 (inactive: [kernel] 2.4.0/3)

u-boot      : [uboot] 2.1.0/1 (field: [uboot] 0.8.1/13)

select      : [ubs-cf0] 2.4.0/3 (secondary: [ubs-cf0] 2.4.0/3)

---------------------

Slot 1: SCE8000-SCM-E

---------------------

serial-num  : CAT1217G028

part-num    : 73-10598-01

cpld        : 0x8274

vtpld       : 0xc003

summit-0    : 0xf2c1001

summit-1    : 0xf2c1101

dpt/tx      : 0x4929

cls/ff      : 0x2113

--More--

SCE8000#>no more

SCE8000#>show version

System version: Version 3.8.5 Build 990

Build time: Dec  1 2012, 12:47:22 (Change-list 716019)

Software version is: Version 3.8.5 Build 990

Cryptography class: K9

Hardware information is:

<<省略>>

---------------------

Firmware

---------------------

kernel      : [kernel] 2.4.0/3 (inactive: [kernel] 2.4.0/3)

u-boot      : [uboot] 2.1.0/1 (field: [uboot] 0.8.1/13)

select      : [ubs-cf0] 2.4.0/3 (secondary: [ubs-cf0] 2.4.0/3)

SML Application information is:

Application file: /apps/data/scos/app/en38553.sli

Application name: Engage SML Version 3.8.5 build 55

Using Lib - PL_V3.8.5_B55 (Compatible with 3.8.0 Protocol Pack 31 build 26)

Using Lib - Classifier_V3.8.5_B55

Application help: Entry point of Engage

Original source file: /auto/srbu-proj1-bgl/apps/users/simanick/autoBuild/App/SML/Engage/ipv6/src/com/pcube/AppTemplate/Main/template_app_main.san

Compilation date: Tue, December 11, 2012 at 04:07:52

Compiler version: SANc v3.20 Build 14 built on: Tue 08/04/2009 06:58:22.;SME plugin v1.1

Capacity option used: 'EngageDefaultSCE8000'.

Logger status: Enabled

Platform: SCE8000

Management agent interface version: SCE Agent 3.8.5 Build 82

Software package file: ftp://ftpserver/C:\FTP\scos\385\scos-v385-b990-sce8000-k9.pkg

SCE8000  uptime is 6 days, 5 hours, 50 minutes, 23 seconds

SCE8000#> 

コメント
Yoshihiro Nishimura
Cisco Employee
Cisco Employee

2行目の "no more" の間のスペースが全角なのが気になりました。

その他はOKだと思います。

Keita Shimoda
Cisco Employee
Cisco Employee

修正しました。ありがとうございます!

Naoki Kai
Level 1
Level 1

Privilege level 10 か 15 でないとできないので、それも一応加えておいた方がよいと思います。

CMTS_Aware#>en 14

Error - Privilege level must be One of 0, 5, 10 or 15.

CMTS_Aware#>en 5

Password:

CMTS_Aware>no more

Error - you have no privilege to execute this command

CMTS_Aware>en 10

Password:

CMTS_Aware#no more

CMTS_Aware#

甲斐

Getting Started

検索バーにキーワード、フレーズ、または質問を入力し、お探しのものを見つけましょう

シスコ コミュニティをいち早く使いこなしていただけるよう役立つリンクをまとめました。みなさんのジャーニーがより良いものとなるようお手伝いします