キャンセル
次の結果を表示 
次の代わりに検索 
もしかして: 
cancel
393
閲覧回数
0
いいね!
0
コメント
JapanTAC_CSC
Level 7
Level 7

2020年4月24日 (初版)

TAC SR Collection
主な問題

FabricPath 環境の Nexus 7000/7700 シリーズで Anycast HSRP 使用時、show hsrp all detail コマンドの出力の Anycast HSRP の State History (状態遷移の履歴) に「 Sby Timer Expired 」以外の Event が出力されません。

また、 State History の Prev State/State には「 Sby Timer Expired 」の Event による Prev State/State ではなく、「 Sby Timer Expired 」の Event の直近の Eventによる Prev State/State の変更が出力されます。

そのため、show hsrp all detail コマンドで Anycast HSRP の状態遷移の履歴を正しく確認することができません。

 

`show hsrp all detail`
Vlan30 - Group 30 (HSRP-V2) (IPv4)
  Local state is Active, priority 100 (Cfged 100)
    Forwarding threshold(for vPC), lower: 1 upper: 100
  Hellotime 3 sec, holdtime 9 sec
  Next hello sent in 0.044000 sec(s)
  Virtual IP address is 192.168.1.254 (Cfged)
  Active router is local
  Standby router is 192.168.1.2 , priority 95 expires in 6.607000 sec(s)
  Authentication text "xxxx"
  Virtual mac address is xxxx.xxxx.xxxx (Default MAC)
  0 state changes, last state change never
  IP redundancy name is hsrp-Vlan30-30 (default)
  Belongs to bundle <1001,IPv4>
 
----- Detailed information -----
State History
------------------------------------------------------------
  Time          Prev State      State          Event          
------------------------------------------------------------
  (29)-16:20:28 Initial         Active          Sby Timer Expired                 
  (14)-21:06:11 Initial         Active          Sby Timer Expired                 
  (08)-10:11:19 Initial         Active          Sby Timer Expired                 
  (29)-18:11:37 Active          Initial         Sby Timer Expired                 
  (22)-16:50:07 Initial         Active          Sby Timer Expired  

 

原因

show hsrp all detail コマンドの State History (状態遷移の履歴) では Anycast HSRP はサポート対象外となります。

解決策

Anycast HSRP の状態遷移の履歴は show logging log コマンドの出力で確認してください。

 

`show logging log`
2019 Sep 29 16:20:21.383 N77 %HSRP_ENGINE-5-BUNDLE_STATE_CHANGE: Bundle 1001 state changed from Standby to Active.
2019 Sep 29 16:20:23.605 N77 %HSRP_ENGINE-5-BUNDLE_STATE_CHANGE: Bundle 1001 state changed from Active to Standby.
2019 Sep 29 16:20:23.734 N77 %HSRP_ENGINE-5-BUNDLE_STATE_CHANGE: Bundle 1001 state changed from Standby to Active.
2019 Sep 29 16:20:23.824 N77 %HSRP_ENGINE-5-BUNDLE_STATE_CHANGE: Bundle 1001 state changed from Active to Standby.

 

備考
各製品の TAC SR Collection の一覧は、よくある質問と解決方法 (TAC SR Collection) から確認できます。

 

Getting Started

検索バーにキーワード、フレーズ、または質問を入力し、お探しのものを見つけましょう

シスコ コミュニティをいち早く使いこなしていただけるよう役立つリンクをまとめました。みなさんのジャーニーがより良いものとなるようお手伝いします