ラボ検証の際、コマンドを発行した時間がわかると便利な場合
があります。その場合 "exec prompt timestamp" を設定しておくと、
コマンドを発行した時間が出力されます。
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#line 0
Switch(config-line)#exec prompt timestamp
Switch(config-line)#end
Switch#
Switch#show interface
Load for five secs: 5%/0%; one minute: 7%; five minutes: 11%
Time source is user configuration, 14:30:46.749 UTC Mon Apr 16 2012 <<<---