デスクトップシリーズスイッチ製品でstorm-controlの設定を行う際に、以下の様なlevelで指定する値に、少数点台3位以下の値が入力できる場合がありますが、少数点台2位までの設定しかサポートされておらず、少数点台3位以下の設定は反映されませんので、ご注意下さい。
Switch(config-if)#storm-control broadcast level 0.023
Switch(config-if)#do sh run int gig 1/0/1
Building configuration...
Current configuration : 126 bytes
!
interface GigabitEthernet1/0/1
switchport access vlan 100
switchport mode access
storm-control broadcast level 0.02
end