取消
显示结果 
搜索替代 
您的意思是: 
cancel
公告

December 2020

December 2020

765
查看次数
0
有帮助
3
回复
Yuki4
Beginner

停电来电后交换机端口亮黄灯


我这分机房4507的交换机,每次市电停电,来电后交换机就有两个光口亮黄灯。重新把光模块拔出来重新插上就好了,每次都得去现场插拔很麻烦
更换过光模块和端口,还是有这样的情况。不是每次都出现(5次有3次),有没有遇到过这种情况的,分享下解决办法
交换机日志
Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-ENTSERVICESK9-M), Version 15.2(1)E, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Tue 27-Aug-13 12:44 by prod_rel_team
*Dec 22 21:10:24.439: %SSH-5-ENABLED: SSH 1.99 has been enabled
*Dec 22 21:10:24.631: %SNMP-5-COLDSTART: SNMP agent on host WHC-ASW-C4503 is undergoing a cold start
*Dec 22 21:10:33.687: %C4K_TRANSCEIVERMAN-3-SEEPROMREADFAILED: Failed to read transceiver serial eeprom on port Gi2/1, try reinserting
*Dec 22 21:10:40.167: CDP-EV: RCVD CDP packet on GigabitEthernet2/2 with len (152)
*Dec 22 21:10:40.167: CDP Packet Process DONE
*Dec 22 21:10:48.539: %C4K_TRANSCEIVERMAN-3-SEEPROMREADFAILED: Failed to read transceiver serial eeprom on port Gi2/4, try reinserting
Dec 23 05:55:02.201: %C4K_IOSINTF-5-TRANSCEIVERINSERTED: Slot=2 Port=1: Transceiver has been inserted
Dec 23 05:55:27.202: %C4K_IOSINTF-5-TRANSCEIVERINSERTED: Slot=2 Port=4: Transceiver has been inserted
3 条回复3
ilay
Rising star

可以尝试一下命令重启单个板卡试试,之前没遇到过网络设备总是掉电的:L
hw-module module # reset
述沭
Beginner

 
CDB
Beginner
Beginner

找到了解决方法吗?
不能显示该小部件。